gas pistons for the front windows

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That is legit man! Im definitely going to try that. Have you done so yet ?


Sent from my iPhone using Tapatalk
 
No I haven't. I have had a bunch of other stuff going on and this seemed to fall to the bottom of the list. I also thought about it a little more. Maybe just one piston per window that way you can still set the opening height with the other side.
 
Let us know how it works out. The front window is my only complaint about the parker. I've replaced the slides and knobs over and over again. Even new they will not hold the window up in waves.
 
Couldnt wait any longer so I made them work.. works great with the right combination and easy to do.
 
coolbreeze":qvsb83la said:
Couldnt wait any longer so I made them work.. works great with the right combination and easy to do.

glad you got it done. I have been working on a bunch of other things around here so it got pushed to the bottom of the list. How about a how too and parts list?
 
I ordered some stronger arms. Right now I have 20# and going to try 30# when I get it perfect I'll give a breakdown of exact parts list. It's not hard but I had to buy 4 times the things I needed to test them. I should have the right parts in a couple days and I'll attach where I got them and a pic. These window arms have been the only thing I havnt liked about the boat. They never hold the window open when I hit a wave. These arms will fix it. I only put them on one side of the window and used the side of each window that is close to center as it is straight and the other side is at a angle.
 
Ok got all the parts in and works great . Note your arms maybe longer or shorter than mine .. mine closed the arm itself is around 10"
But what I did was I ordered from Ebay ss gas shock 17" 30lb got 2 of them and on ebay there is a guy in summerville sc that sells a 10mm ball offset for shocks. Got 2 of them. They bolted perfectly. For the bottom bracket I got from same guy as the shocks a flat 10mm ball mount ss and just had to drill one small hole to line up with factory holes. I was able to use all the same screws as before. Seems to work good.
Shock part number is np-ss-1720-30
Flat bracket didnt have a part number but I have pics of all the listings.
 

Attachments

  • SmartSelect_20190125-163101_eBay.jpg
    SmartSelect_20190125-163101_eBay.jpg
    57.8 KB
  • SmartSelect_20190125-163118_eBay.jpg
    SmartSelect_20190125-163118_eBay.jpg
    142.2 KB
  • img20190125_162138.jpg
    img20190125_162138.jpg
    30.5 KB
  • img20190125_162119.jpg
    img20190125_162119.jpg
    14.4 KB
  • img20190125_162138.jpg
    img20190125_162138.jpg
    30.5 KB
  • SmartSelect_20190125-163741_eBay.jpg
    SmartSelect_20190125-163741_eBay.jpg
    143.6 KB
And these pics too.
 

Attachments

  • img20190125_164217.jpg
    img20190125_164217.jpg
    12.4 KB
  • img20190125_164146.jpg
    img20190125_164146.jpg
    8.6 KB
These hold the window up better than two struts that come on each window? What about different hold heights?

Sent from my SM-N950U1 using Tapatalk
 
Seems to hold it up good .. I got a 30lb strut on it. You can always try a 50 or 60lb if needed. But I only out 1 strut on each side so you can use the factory arm from diamond seaglaze to lock it in at diffrent levels. But for me if the window is open i want it all the way open.
 
Back
Top