Search results

Thanks, they just arrived and installed. Two 10's are plenty, even if left open underway. The installation guide shows how to determine the weight rating required using a scale and a stick at the attachment point.

Welcome!

If you don't already have one get a copy of the wiring schematic.

What force rating struts are you guys using on your ebox's? No markings left on the old ones. Box has twin 7.5 struts supporting tinted acrylic door 10, 20 and 30lbs are the options for the 7.5".

Top Speed?

Welcome! Share what you have.

Locate and disconnect the deutsch connector. Release and remove the pins. Attach a pull line to the cable. Pull the cable out from the transom and use the pull line to draw the new cable back in. Reinstall the deutsch connector and reconnect to the other cable.

I would have a local shop fabricate them and use a heavier seat cushion. The OEM ones are pretty thin.

freekin awsome

welcome!

24' overall 4' tongue to bow 18' boat 2' transom to prop

Always some 18's here on Long Island

Back in 2021 I replaced the fill, vent and supply lines with Trident hoses from Defender. No sealant.

Try fleabay. You can find good condition used ones for way less than new.

Hard to say without knowing the condition of the boats core structure and fuel tank condition. Just from your description and without pictures it could go anywhere from $8k-11k.

If you plan on doing your own maint/repairs a proper shop manual should be in your arsenal.

Welcome!

You picked a great hull to start with!

Following. I'm actually in the middle of a rehab on my newer boat which doesnt have easy bilge access like my parker.

OEM sensor is quite expensive $200! but there are $20 ones on fleabay that you may get lucky with.