Search results

I think she has sold!

Thanks! Make an offer very very soon and it may be yours! If not it is going to a broker as I am out of space! Mike 443-309-4068

Finally posted pictures. Call me if interested. Motivated to sell soon. Thank you!

final pics - email, call or text if you want something specific.

More Pics

1995 hull - solid as a rock - zero soft spots! 2004 Mercury 200 with about 300 hours - runs excellent and very strong! 2001 load rite galvanized tandem axle trailer (brakes do not work) Bennett trim tabs Garmin plotter Marine radio Stereo T top with phone booth enclosure + gunnel...

Sorry to bring such an old post back to life but I finally got it figured. Luckily I banged up my 3 x 15 x 15 prop which turned out to be the best I could do. It was not great as I could hear the ventilation but could drop rpms then slowly raise power to not lose the traction. I took the damaged...

Thank you Ben! I am pretty well dialed in to the best of it's abilities. While she is slow, she is quiet and effecient. This is just my bay boat that rarely sees the ocean so the power is adequate and reliable! Thanks to all for the help!

It is a three blade 15 x 15. While it may not be enough hp for you, I am trying to get it to be the best it can by asking owners of similar set ups. Just looking for facts here to help the cause. Thanks

Thanks! I ran the prop search that you sent - It agrees with your thoughts on the 17! Hoping to have a 150 owner chime in for confirmation and I will go get one. I will also double check the height of the motor. I am on the lowest setting. From what I read, it looks like it needs to go up one...

Update - I could not get the pictures to load but I took the "problem" transducer off. It reduced the ventilation significantly. The prop is a 15" x 15" aluminum - the motor will run it to 6000 rpm with zero trim which gets about 34 mph on the gps. Can anyone running a 150 hp motor on a 21...

Thanks for the link - I will check it out! My boat is on my lift so I can get pictures tomorrow and post them. The more I think about it, the transducer has got to at least contribute to the problem. I will probably take it off, seal the holes and run it the next chance I get. Worst case I can...

I recently took a perfect performing yamaha 200 two stroke off and replaced it with a 2011 used honda bf 150. When we put the 150 on, it came with a stainless 19 prop. With a heavy load, it could barely get on plane. I went to the local prop shop and he sold me an aluminum 13 prop. With that...

I had windows made for both boats so I took them off. I sold the 23' but still have the 21' but have no need for the windshield as I leave the windows on all the time. My email is mbcorle at aol dot com if you are interested. Thanks. Mike

Hi - The width of the clear one is 35" where it would connect to the console. I have most, if not all, screws and spacers.

I have two plexiglass windshields off of parkers - one is off a 1997 23' DVCC the other is off a 1995 21' DVCC - both center consoles - one is smoke and the other is clear. They are in Ocean City, MD. Shoot me a message if you are in need. Thanks Mike

SOLD

Hi Mike Sorry that I failed to post the price! I am asking $26,500.00. Thank you!

I forgot to mention that the motor is on a full bracket. Still trying to get pictures small enough for the site to accept them. If you email me, I will send a bunch direct to you. [email protected] Thank you! mike

1997 DVCC Hull, 2006 F250 Yamaho motor with 265 hours, 2003 Load Rite Trailer, Garmin 740, Furuno Radar, Furuno Sounder, T Top with Eisenglass, trim tabs, etc. Boat has been well maintained. Only selling to get the same boat in Pilot House model (would love to trade!). Please call me to...