Search results

I was thinking the same one straydog used. What’s your thoughts on the brass? Great idea! I’ll try it. There is not much standing water in my bilge but I’m going to put the bow of the boat up in the air so anything that’s left in that very lower from under the tank comes out the back

With almost no access I managed to get 2 holes drilled for brass scupper tubes and plugs for future drains. Slightly damp foam at bottom but looks like most drained out 🙏👍

We get snow at my place but not like back east.

It’s not AC but works. Seen a few local guys put this in the bow in front of the portapotty. https://www.icybreeze.com/?gad_source=1&gclid=Cj0KCQiAv8SsBhC7ARIsALIkVT2Gx9xUg4jfJBryndCqqbisf8XDibK8YsKDuhoQblzIYx83X4KGqB4aAmX4EALw_wcB

Any upholstery shop should be able to do it. My local hole in the wall shop has made me them for the last 3 boats for less then $600.

I love the mummy wrap. In SoCal the sun just destroyes any tarp in a matter of months. I went the expensive rout.

I’m kinda off thinking the same thing except I did a core sample of foam that was soaked from 3” below the top of the tank and it’s now bone dry and powdery. Hoping that means most all of it can dry and give this tank a good number of years to go. I’m also installing 1” drains into the bilge.

The water is from when the bilge filled with rain water months ago and I had all the pumps and hoses out and drain plug in 🤦🏻‍♂️ We had 3 days of crazy rain.

Update. I did some research and it seems as though the PVC pipe from the anchor locker is the lowest point on the boat under the fuel tank. So after drilling a access hole I popped a 3/8” hole into the wall separating the gas tank from the bilge and boom water gushing. Hopefully this fully...

Found some trim on Amazon. 4200 the seam and she’s ready.

Window did not want to remove. Got the lower trim off and someone 5200 the window in so I 4200 the outer perimeter so hopefully the problem is solved till I want to surgically remove the window itself.

After washing the boat I noticed the window above the sleeping birth on my 08 2320 leaks. I took all the screws out top and bottom and it doesn’t want to come out. Anyone have a schematic or resource for this?

There is like 10’ of it so I need to find a roll of this stuff

Anyone know the proper term or part number for this trim that runs along the back of the cabin? Can’t find it anywhere.

It’s original Parker on the deck station. I went and got the boat and on the trailer the steering works so I’m at a loss. Going to float it Sunday and see if I loose steering under hydraulic pressure.

Hey everybody I finally got my boat re-powered after waiting almost a year exactly. West Coast Marine Services as well as my friends shop did the install and see trial today. Everything went fantastic except the fact apparently my second steering station does not work. All the lines are hooked...

Great info! My Parker has the battery shelf above the tube that runs across the bottom of the boat. Do you think I need to drill holes underneath the battery shelf? Replaced the deck covers and sealed the living s**t out the the hole before placing the outer ring back in.

Mine doesn’t have that ridge along the rim like yours. If mine did that would be a lot better design. I’m going to glue in the new ones and then silicone the threads to easy removal but additional seal.

Purchased the screw in type 6”. Posted in the wrong thread by accident. Will make them fit the hole and then seal.

Picked up some 6” ones at the marine exchange today. Looks like I gotta carve the hole out another 1/4” for them to fit but they should be a tight seal. See the pic of the factory ones