Search results

Your welcome and good luck. It takes time to Find the right one. Sent from my iPhone using Tapatalk

Very fairly priced and best of luck with your sale. I have to ask though, where did you get that fold up seat mounted on the pilothouse wall? I’m looking to do something like that on my 2320. Sent from my iPhone using Tapatalk

Outside of the normal areas a surveyor a would look pay close attention to the top of the fuel tank (via the pie plate/hatch). If it looks wet or very corroded keep in mind that it may need replacing at some point. Parker foams their tanks in completely and if that compartment gets wet the foam...

If you check my posts you will see what I needed to do to mine. Fun project and a good learning experience Sent from my iPhone using Tapatalk

Adress that roof! I did a re core on mine 2 years ago. I had penetrations that leaked and compromised the core (rotted). The best way to be sure it won’t happen is to drill a larger hole than needed the fill with epoxy. Once hardened drill the needed hole thru the epoxy. This way if your...

http://www.cecilmarineonline.com/parker ... y-to-ship/ Sent from my iPhone using Tapatalk

Here is my kicker mounted using a Parker kicker plate. IMO you do not need more than a 9.9 for a kicker if it’s a high thrust. Your limited by hull Speed so both a 10 hp and 25 hp will only push you about 6-7 mph. I use mine for Salmon trolling on the Great Lakes and love it. It does a great job...

Congrats ! Enjoy Sent from my iPhone using Tapatalk

See what manufacturer offers the best deal and warranty. Whatever your rated for on the transom I would repower at the max hp. IMO they all make great motors. I would go with fly by wire controls. Sent from my iPhone using Tapatalk

Like mentioned above. It’s possible to find one in that price range but very unlikely, they tend to hold their value but deals do come up occasionally. Sent from my iPhone using Tapatalk

Like Brent mentioned open the pie plate over the tank and it should have a tag there with a part number. I know RDS made my tank albeit mine is an older model but you should be able to find the manufacturer there and email them for the specs and shop drawing (if needed). Sent from my iPhone...

I regularly tow a 2320 (1000 miles last season) with a 1/2 ton with no issues. The additional beam width on the 2530 may be an issue if you intend on primarily towing vs a slip. I have towed oversized loads many times over the years and you just need to pay closer attention to clearances. I was...

Congratulations! Nice setup Sent from my iPhone using Tapatalk

Agreed. That truck will have no problem at all. Only concern is the oversized load and permits required. Keep in mind if an accident occurs with an un permitted oversized load you may face a lawsuit. Sent from my iPhone using Tapatalk

Looking at the posting the vessel appears to be in good condition and well equipped. IMO the price is a tad high but perhaps there is room for some negotiation. I would strongly encourage you have a survey conducted (by a reputable marine surveyor) and have the engine looked at by a mechanic...

Thanks Brent. That’s a good option. I’m also considering routing the cable thru one of my rigging tube holes and down thru the bracket. Sent from my iPhone using Tapatalk

Looking ahead to this spring I have new piece of electronics to install. Unfortunately a thru hull transducer is not available so I need to drill a hole in my transom (*gasp). I intend to epoxy a plate to the transom to mount the actual transducer to. I’m torn on how to do my pass thru and...

Please guys, let’s not turn this forum into THT. Sent from my iPhone using Tapatalk

Why don’t you try and call/email Lenco. They would know what wire could be switched and the amp draw. Sent from my iPhone using Tapatalk

Could a simple toggle switch work or would a relay be needed? Sent from my iPhone using Tapatalk