Search results

That’s very disappointing. I have an 04 1801 that has barely any rust on the hinges. I clean the rust seasonally with rust remover and it stays pretty rust free for the most part. I do get occasional rust from the cheaper quality stainless they use on some newer items like a helm wheel and...

Wow what a story. There was a man who I knew who went fishing with his son in the Long Island sound July 3rd. The 50 year old captain was leaning over to grab a rod and happened to fall in the water, within seconds the man disappeared into a strong tidal flow and never resurfaced. The 14 year...

So beautiful 😍

Looking good 👍

2004 Parker F115 Yamaha Uflex hydraulic steering Bennet bolt 9x12 tabs Scd4 powertech 13x16p Garmin echomaps 94sv Rhodan 80lb 60” trolling motor Taco marine Neptune leaning post New 704 binnacle New gauges Restored gelcoat

Anyone running this prop on there 1800 1801 Parker? It’s supposed to be designed for 75-115hp motors, 4 blade vented prop with good rake and cupping. I’m currently running an scd4 in 16p looking to try the Mercury 4 blade.

Also since I been on this crazy search for optimizing performance I went ahead and serviced VST, injectors, 2 micron between vst and lift pump, and ran compression check 145psi across board. What’s driving me nuts is 1 lost 100rpms with exact same prop, load etc, Ans am unable to figure out why...

my boat is a 2004 with 780 hrs Wot with myself, 30 or so gallons of fuel, TM and 3 batteries with average amount of fishing gear yields 5600 35-36mph if I have passengers usually 1 or 2 heavy fishing partners 5500 34 mph. I took the plunge and raised the motor to the final hole on my bracket...

I was wondering if there is anyone that has added a jack plate on their 1801 transom. I am considering doing this to add some setback for 2 reasons, one the anticavitation plate is still buried with current mounting setting on bracket, (3rd hole from top or second from bottom) and second for...

update for anyone looking to install hydraulic UFLEX or SEASTAR flexible hydraulic hoses, I ordered the 16ft and it was too short by about 2 -3 ft. So i went ahead and ordered the 20ft Uflex hydraulic hoses rated for 1500PSI and they were perfect. I didnt go with the bulkhead fitting bc I didnt...

Ordered a Uflex Hytech 1.0 kit with the nylon hoses and compression fittings. I spoke with the engineers at Uflex and they strongly recommend using the 1500psi flexible hoses in high traffic areas as the nylon 1000psi 3/8 hose is prone to kinking. I am unable to find any information on previous...

Tried to upload a bunch of pics and a lot of them are too large. Will have to figure out how to shrink size to upload them.

Interested in selling my 2004 Parker 1801 with Yamaha F115. Boat is immaculate and needs nothing. Boat was purchased in 2017 and has been gone through. Since purchase, I have updated the fish finder unit, and cleaned it up nicely. Lower unit seals redone as well as water pump, t stat, fuel...

thanks for all the replies. After careful inspection there seems to be no water actively entering the scuppers when the boat is at rest with no one aboard. The cutout that pools with water only does so because the scupper holes were placed higher then the reservoir so that any water that has...

Should a 2004 Parker with 115 4S let water in through the scuppers at rest in water with no added weight or people in boat? Essentially should there be any pooling ? Are scuppers below waterline, or is the boat waterlogged and sagging in water??

Should a 2004 Parker with 115 4S let water in through the scuppers at rest in water with no added weight or people in boat? Essentially should there be any pooling ? Are scuppers below waterline, or is the boat waterlogged and sagging in water??

Hello, I’m new to the forum! I have been searching high and low for a used Parker 1801 for the last few months. I missed a few good sale opportunities due to lack of funds, however after selling my previous boat I can now shop in a competitive market for Parker’s in the early to mid 2000s year...

Hello, I’m new to the forum! I have been searching high and low for a used Parker 1801 for the last few months. I missed a few good sale opportunities due to lack of funds, however after selling my previous boat I can now shop in a competitive market for Parker’s in the early to mid 2000s year...