Search results

Can’t keep them over 35 inches, the big fish that night was my bro in law got a 42lber

I troll mojos and spoons…..from outriggers and the stock holders are fine….

I wouldn’t use 5200, it’s permanent and if you want to take rod holder out won’t be able 4200 is plenty. Also unless you plan to troll from the rod holders, bolts with fender washers are fine….

I notice that Parker didn’t include an anchor chock to guide the rode to one side of the bow. I want to put a chock on the front of my bow to keep the rope off the anchor light and not hit my trolling motor. pic 1 where I wanted to put it I find it hard to access the backing because the...

I added these to my boat I have a 21se like you and found I needed space for more rods….

Brand new 21se here and I love the boat. I am starting to notice all the hardware holding the livewell down is rusting. Then my jumó seats have rust on the screws. Finally my tow rings on the bow are rusting. my dealer tried to file a warranty claim with Parker and was told stainless is not...

No hatch opens. The motor is on a slide and moves…..

Swapped the pump cartridge and used the solder heat shrink connectors with a heat pen pretty cool and easy way to use it. theae pumps have a 2 year warranty so trying to get another one under warranty for the one that broke. Pump ran well. the pump they had in there looked very old pics of...

Love it I am all straight now I can feel the motor runs alot different. 1000x better local shop got the backing plate in there

Thank you everyone I checked the circuit breaker and it is a 5. Is that right? Thanks for the advice on turning the sea cock off, this is my first boat with a wash down and livewell. I never realized how clutch a livewell and wash down was

Thank you, yes I will check the fuse from the back ans confirm the size. Then I see you can actually cut the wires and replace the cartridge. Maybe I can do that. I can also take the cartridge out and feel around for debris. Sounds like I have a plan

Is this a cartridge swap? How do I check the impeller? I can kind of hear the motor straining a little bit before it dies…… the other stupid question I have is it seems like this bilge area is never dry and then accumulates like crud is that normal? anyway dealer owes me some hardware screws...

New 21se owner here I have about 65 hours in the boat and had it since March. I just started using the livewell and randomly last week the breaker was tripped. I pushed the breaker in and used the livewell for the whole trip with no issues. Today on the next trip I was out and breaker tripped...

This was resolved amicably…..backing plate was put in by new shop and they will fix the glass to make it look like it never happened they have factory gelcoat from Parker and Can copy the skid pattern with a mold. I ran the boat in rough conditions with the plate yesterday and Can notice the...

The location is ok, if I start to mount towards to the port it eliminates area to bottom fish. I dock my boat and it is ok. As far as the support for tbe head i could add one but it is not standard. The motor didn’t move much without the support.

The boat is not going there a third time. They are an hour snd a half away and sorry you don’t get third chances. They will be getting a bill for repairs.

I reported to minn Kota and my boat will never go back there again. My local shop that comes highly recommended and works on lots of fabricating and luxory boats has agreed to fix this butcher job. the second time around when they fixed rhe position I agreed to take care of the glass work in a...

I only mention the glue because I can’t reach the forward screws under the locker, having the washer and nut together I can maybe get a really long handle to get in there. the way the boat is now, do you think I can run the boat like that until and just not use the trolling motor?

The installer that did this monstrosity is Reynolds marine in niantic,ct i am thinking since I cannot reach the back of the bolts maybe use this toggle bolt instead.

Started boating a few years ago, My whole family has gotten into it, but we got tired of the pounding of our Montauk. I made the decision to buy a new 2021 21se, I opted to get a trolling motor, I boat in a rocky area and take family members that don’t fish bottom fishing snd the spot lock makes...