Search results

Sorry if questions seem kind of basic. I haven't work a whole lot with cars or with tools in my past but know preventative maintenance is important. I own a Parker 21se 2021 and it came with a load rite trailer. The trailer is going on 3 years and sitting in my driveway at my house so I am...

Thank you for the response and why I love posting here. Good information on boat building. If I do find it is leaking you think a simple run some sealant around is best way to remedy it? Quite frankly the few things I did have go wrong with my boat Parker was good with mailing me parts. My...

Correct the leak is new. Just want to understand if my boat is doing it. Also is that normal?

Ok so that’s ok then? There is leaking water from the outside to the inside

Anyone see this My 21se I can see the backside of the gunnels the hardware and it’s rusted. In curious if anyone has a 2021 21se and notices this? I may take a hose and spray and feel the backside and see if water comes into the hull. It is does may put a bead of clear caulk on the...

All done I drilled out all the old screw holes with a countersink, laid loctite marine epoxy in them and packing tap over the top. For the battery box, I filled the holes good with 4200 and 4200 on the screws. Got a nice tight seal. My next step will be to take out that old charger and sell...

Guys thank you. I got the tray from bass tech. This seems like a much sturdier product. I also like how the screw holes are under the tray which will make for a better seal with sealant…

Thank you I have ordered those battery trays that you sent, now to patch 4 more holes and redrill down the new battery box. Anyone have any luck in using the cap on the locktite marine epoxy?

My battery 36v 60ah is made to be a standard size 31. It also weights 34lb. That battery box still not good? It has 4 attachment pints to the floor with size 8 screws I bedded in 4200. Keep in mind I also need to take the battery off and on the boat to charge so some sort of buckle would be...

You have a battery tray you would recommend? I am all for making it best in practice. I went to the boat today and countersink all the screw holes and laid in loctite marine epoxy with packing tape over to get it flat. For the holes for the existing battery box I bedded screws in 4200.

It’s fits better on the new battery I did try to move the battery and no play. New battery is only 34lb those old lead acids 55lb a piece What do you recommend I do with the screw holes? I used Pettit fast dry in the red tube and masking tape over it to hold it in. My new screws holding the...

Good question. I have no clue how they get water in there. I just know when I took the screws out there was no sealant on them and weeped a good deal of water. You are right that is in my console. The screws are an inch and a half thick so not super penetrating. Maybe that is where the bilge...

I wish this were the end to this drama lol it seems to never end with this. My marina implemented a no extension cord policy so decided to upgrade to a lithium that is 1 36v and is the size of 1 lead acid battery. In order to do this I had to removed and reposition my battery box. none of the...

Every 3 years the shop paints my boat. I use a hard paint that has high copper and it’s a multi season. At the end of every season I run a power washer over the boat to get rid of some of the grime. I am on season 3. Last year I painted my tabs with Pettit eco hrt over what as there. I made...

Fisher cover is custom made they measure it. I have it on a 21se. They make it for any boat they want and warranty it for 10 years.

Is this as easy as it seems to wire in an on/off? Also if the off switch is chose can I prevent surges of electric from frying my motor when charging?

I bought this from fisher it was $1600 but has a 10 year warranty. I shrink wrap my boat the first year and it was $400. 4 years break even and not relying on shrink wrapper

Not to sound stupid but I always trip the breaker when motor is in storage. Isn’t that the same as an on/off switch. Also it is recommended to charge with the breaker tripped

I would take a look at the internal zincs irs super easy. I bought the internal zincs to do and at 300 hours were barely touched…..

In the Parker group there is a guy named Michael Conley that makes them