Search results

Thanks guys! This helped alot. Due to wire length restrictions, I'm going to have to choose the lesser of 2 evils. A) I run the forward and aft bilge switch off the start battery, with a backup 3rd pump hooked to the house battery, or; B) Run the windlass off the house battery. Of course, I...

Thanks guys. And I feel dumb for asking, but its safe to say the starboard battery with Yamaha labelled positive cable is the start battery correct? That battery appears to have everything hooked up to it - bilge switches, windlass, etc. My port battery only has an 6ga pos and neg, and small...

Is Replacing the stock 1-2-both switch to the BEP cluster as easy as switching the wire from the "1" position to the "start" on the BEP and "2" position to the house on the BEP? I have the BEP cluster but don't want to disconfigure a working system and screw things up.

At least in Bodick's pic he has a common ground. Strange that mine doesn't. My boat isn't equipped me with livewell or washdown pumps. And everything else functions as it should. I can't believe the crappy connectors they used!

Are these factory connections??? Anyone know what accessories are grounded here? This bus is located on starboard side of bilge. Shouldn't this bus be grounded directly to meg at battery as well?

Sorry. Meant Very nice Install!

Very nice install? I'll be doing the same on my 2510. Any other pics of the mounting plate? And it appears you didn't cut the bow rail?

And thank you very much for your great thread!

There's been a couple threads where it seems the motor folds out first, then down under the rail. This pulpit mount seems great, but I'm wonder how cumbersome it is leaning out over the bow to deploy and retrieve...

I've been searching previous post on various TM installations. I'm wondering if anyone has mounted a Rhodan 84" on a 2520 or 2510 without cutting the bow rail. Most of the installs I see where the rail isn't cut are with the minnkotas. I'm wondering if the Rhodan could be lowered similarity...

Also curious if you have to crawl out on the pulpit during deployment and retrieval?

Hi. Any concerns with where the aluminum mates to the pulpit along the outer edge reveal?

I'd watch out with a shop vac around potential gas fumes.

2003 2510 or similar. Anyone successfull or have pics of a cutout tackle system installed in the box beneath the pedestal seats?

For those that installed rod holders in the transom, what angle did you use? Is there enough space to fit a 30 degree, or do you have to go 15-degree. I'm looking to add two to either side of the transom fish box. Thanks!

I'm confused...Isn't that a crack on the outside of the hull forward of the pick up?

Yes. My understating is that you only have to fill the old mounting screws and drill new. The overall cutout in the deck is the same.

Any update from those that installed the T-H marine 6" twist off plates. How are they holding up? I see Great Lake skipper has the temptress Parker 6" twist off plates. Trying to decide between the two. Thanks!

Thanks Wart. So you added a dedicatd thru hull for the back up bilge? I ordered the 90 degree thru hull for the forward bilge, but wasn't thinking of that on the aft bilges as well. Whats the preferred bilge hose? I'm not seeing to many options in 1 1/8"

Thanks guys. I ordered the 1 1/8" gemlux thru hulls to replace the rear bilge and fish box drain. Wondering now if I should of went up a size for a bigger pump. For those running a spare or back up bilge is a 2nd thru hull required or can I wye it in close to the outlet thru hull?