RIPescador
Member
- Joined
- Oct 25, 2011
- Messages
- 6
- Reaction score
- 0
I made a table for the back of the leaning post and installed it last weekend. In the picture you can also see new rod holders which I had installed this winter.
The table was pretty cheap; $36 piece of 12x27 starboard (on sale from ~$50), two cup holders ($38 for both), and misc swrews and hardware (~$20). The whole thing was about $100. It looks really good and does not take up much space. I also installed, which is not in the picture, a floro line holder which is simply the hole part of the cut-outs for the cup holders screwed together. It is located between two of the rod hodlers and holds two spools of floro (3 1/2 inch diameter).
I also fashioned some storage for the inside of the center console and i will post pictures of this shortly.
Boat has been in the water since the end of March.
The table was pretty cheap; $36 piece of 12x27 starboard (on sale from ~$50), two cup holders ($38 for both), and misc swrews and hardware (~$20). The whole thing was about $100. It looks really good and does not take up much space. I also installed, which is not in the picture, a floro line holder which is simply the hole part of the cut-outs for the cup holders screwed together. It is located between two of the rod hodlers and holds two spools of floro (3 1/2 inch diameter).
I also fashioned some storage for the inside of the center console and i will post pictures of this shortly.
Boat has been in the water since the end of March.
