Buying it! Moving forward with purchase and need bunk measurements for 2520

Island Dreamer · Oct 30, 2020

I have a trailer being delivered to Houston on Sunday to transport my 2520 Parker. Does anyone have the measurements for the bunk width? I found one online from Parker for a 28 foot like this but cant find a 25 foot diagram.

Andy · Oct 30, 2020

Island Dreamer said:
I have a trailer being delivered to Houston on Sunday to transport my 2520 Parker. Does anyone have the measurements for the bunk width? I found one online from Parker for a 28 foot like this but cant find a 25 foot diagram.

I don't have a diagram to show you, but here are the dimensions; This is for a 2013/2014 Parker 2520XLD (the deeper-V version). The trailer is a 2019 Road King.
Here is a video of the trailer;
The main bunks are 11' long. 4.5" wide on top, and 6.5" 'deep/thick.
They are spaced 5 feet apart, outside bunk edge, to outside bunk edge.
There are two smaller 'flat' bunks forward of these main bunks. They are 79" long, 5.5" wide X 1.5" thick.
They 'start' 10" 'inside' the main bunks. They are spaced 17" o/s to o/s aft. And narrow to 12" o/s to o's forward; in essence, on a V-shaped angle, and and also angled V-hull-shape.... By the way, most of my family lives in Houston and Woodlands. If you happen to see them, tell them I said it's time they sell their silly Sea Ray and to get a REAL boat, like a Parker! ☺

Island Dreamer · Oct 31, 2020

ThAnk you ! This came from a trailer dealer. I did confirm that the 2 1/2 reference is inches as in 2 1/2 inches on the spacing of the inner bunks. This diagram appears to show a very different set up but the question is can it still work? This will be very helpful since I am purchasing a trailer site unseen from somewhere in Texas. The gentleman I’m buying it from is driving it to the boat dock in Houston where the owner is going to set it on the trailer. That’s why I’m trying to get the trailer dialed in so these two gentlemen can get the boat on without any issues.

Island Dreamer · Oct 31, 2020

Here is the pic from the pdf above.
This came from a trailer dealer who specifically sets up trailers for the Parker 2520

Andy · Oct 31, 2020

Island Dreamer said:
Here is the pic from the pdf above.
This came from a trailer dealer who specifically sets up trailers for the Parker 2520

I hope some CP trailer-experts chime in here.... The trailer bunk dimensions shown in your diagram do not make sense to me... The dimensions I showed above are not close to being the same as this. I guess there are many other usable bunk configurations?? But, 2x4"?? I hope that is not the 'lumber'/ bunk size/dimensions. Unless that 2X4 is something other than wood (solid aluminum? steel?? TITANIUM?? ☺) then I think you will need a smaller/lighter boat than a Parker 25....