Converting windows to DSG

[Brent]

Anyone replace Wynne front windows with ones from DSG.

Any price and contact info to share?


Sent from my iPad using Tapatalk

 

[jpg1969]

I replaced all of the Wynne's to DSG. It was a painful process only because the first customer representative from DSG did not have any attention to detail to say the least - I had a bad feeling from the start. We took the old windows out and made templates of the openings as instructed clearly marking each template as to which window and whether the template was traced from inside out or vice versa. Obviously it makes a difference because they made the first set reversed. DSG came through and remade them properly and were clearly embarrassed - I'm pretty sure the sales rep was fired.
The front opening (starboard) was $683 and port fixed was $431. In the end I worked with someone by the name of Chana Riley who resolved the issue. [email protected] . This was a few years ago so not sure if she still works for the company but she was great to work with on the project.

 

[Brent]

Thanks . Will the windows used by Parker today fit or you need to custom order ?


Sent from my iPad using Tapatalk

 

[warthog5]

The front opening (starboard) was $683 and port fixed was $431.

I would never do that....It would Never Fly in Fl. I had that setup in Wynn windows and removed the Port and made it open.

With the door open...and both front windows open, it creates a Vortex of air thru the cabin.

I never understood why the Port side opening was a option? It should be mandatory.

No opening window creates a Sweat Box.

 

[jpg1969]

Thanks . Will the windows used by Parker today fit or you need to custom order ?

Not sure but I would not take a chance considering the price of these windows. Perhaps the factory could answer if they changed the cut out size when they switched over - not sure if the radius sizes are an exact match either.

The front opening (starboard) was $683 and port fixed was $431.
I would never do that....It would Never Fly in Fl. I had that setup in Wynn windows and removed the Port and made it open.
With the door open...and both front windows open, it creates a Vortex of air thru the cabin.
I never understood why the Port side opening was a option? It should be mandatory.
No opening window creates a Sweat Box.

I'm in the NE plus my electronics are mounted on the port side - rare that we don't get spray so it's MY preference for MY application.