Deck hatch gaskets

[camron]

Hi all going to start picking up some pieces for this winter. Does anyone have a good place to get replacement hatch gaskets from? Or is it a better idea to replace them and seal up the screw holes anyway? The boat is a 99 and they look original.

 

[jpg1969]

In 1999, they used Tempress Marine for both the rear bilge hatch (13" x 23") and the pry out round access plates (6"). They sell replacements parts on their website:

http://m.tempress.com/#!/Utility-Hatch- ... ory=442136
http://m.tempress.com/#!/Deck-Plate-O-R ... ory=442136

 

[camron]

Awsome thank you for that link. With all the rain we have had recently i have noticed some water getting in and that rear slam hatch gasket is all crushed and not doing its job.

 

[Brent]

I replaced deck pie plates so could seal the frame better to deck, remove old silcone and check the deck wood. One is a screw type and the other is a pop out with clear plate so we can check the tank fuel guage the first owner added and used one old plate to add a solar fan to ventilate the tank coffin and bilge . M2cw

Sent from my SM-G930V using Tapatalk

 

[Brent]

Armstrong has water proof deck plates

http://www.armstrongnautical.com/deckplates.htm

Warthog hused one on his transom bracket