Factory seat and storage in cabin 2520

[newguy]

I just pulled the factory storage and seat structure from my 2520 cabin. This sat on the left side of cabin and has a large flat compartment at the base and a smaller taller compartment that makes up the seat base. Before tossing it, I was curious if this should be put on the classified section. Is this a wanted item? I wanted more floor space.

 

[HM5]

May I suggest, take a couple of pictures, post them in the classified forum. Condition, measurements and weight too. Also where it is located so shipping calculations can be made.

Could mean some extra cash for more mods to your Parker

 

[newguy]

Will do next weekend.

 

[tara11]

How did you get it out without cutting into pieces, I took out both of mine, but had too cut them into pieces to get through the door ?

 

[newguy]

The bottom half of the lower compartment un-bolts. It is built in two pieces and has a teak trim strip whick covers the seam. I un-bolted it and put it on it's side. We then rotated out the top half ("L" shape) through the door. It was still a tight squeze but was obviously designed this way to fit through the door opening as there was no more that a half of an inch clearance at it's tightest position.

 

[evening tide]

i am very interested in storage/seat i need to see pictures email at [email protected] thank you

 

[Megabyte]

i am very interested in storage/seat i need to see pictures email at [email protected] thank you

The power of ClassicParker!

 

[newguy]

was tied up with catching up on family realations last weekend... riding with son, christmas tree farm trip etc. I'll try to get them to you asap

 

[pfeifferj1]

Another country heard from! I would also be interested. Post picture. The seat structure on my 2520 was modified to put a Marine Head in and I would like to go back to the orginial.

 

[newguy]

Here are a couple of pics of it. It includes the seat pad top and seat back pad. Both are usable although I would personally prefer new white covers. The bottom compartment also includes the door and door frame and all hardware. The teak trim strip is all intact except a short broken section next to the base compartment door. All gel coat intact with a chip in a corner (about 1" long) on base compartment shown in pic. It weighs about 150 lbs on a pallet and would ship truck freight. The dimensions are 32" front to back, 33 1/4" side to side and 34 1/2" tall to the top of the seat cushion.