Help with replacing trim tabs

[Marty D]

I have a 2320 P.H. 2005 parker with swim platform. I want replace the trim tabs n go to the next size biger. I read somewere on this site to go biger n i think that is whats needed. My question is what make do i buy ? What size ? If i go biger am i going to place the motor in a dif position ? I want to use the same 3 holes that hold the top of the motor. Thanks Marty D.

 

[DaleH]

Try a search on the terms 'lenco upgrade' in the search feature. Many here have upgraded from the 12x12 planes to the 12x18s using the actuAtor in the same spot.

 

[Marty D]

Try a search on the terms 'lenco upgrade' in the search feature. Many here have upgraded from the 12x12 planes to the 12x18s using the actuAtor in the same spot
I read most of it and know what to buy and how to do the job. No one talked about --Edge plates- Thats what i have now 12 x 12 with edge. When buying the new ones should i get that or just the flat 12 x 18 tabs ?
Marty

 

[DaleH]

No one talked about --Edge plates- Thats what i have now 12 x 12 with edge. When buying the new ones should i get that or just the flat 12 x 18 tabs ?

Only thing I think that does is make them stiffer, so they'd deflect less when deployed.

That's my #1 boating pet peeve ... beside motors with wrong props and mounted too deep , being too small tab planes.

I have no idea on the bent edges models, so hopefully others will opine.

 

[Sully]

http://www.lencomarine.com/upgrade_lenc ... _Specs.pdf

Edge Mount Kit Upgrade
Since the placement of the upper bracket is lower then a standard mount, an
edge mount can be retrofitted only with another edge mount trim tab.

 

[Marty D]

Thanks guys- Dale thank you. I wanted to show you --Dale--what i have done to my cabin. As a parker owner you know its hard to fish when you have a drop down cabin n no rear controls. I tryed to post my pict here long time ago but file to big. Can i send some to you ? Send me your e-mail through priv. mess.. or my e-mail is martyslures at yahoo dot com
Marty D.

 

[WAJSKI]

can you buy just the tab plate? were can you buy them :?:

 

[Sully]

When they sell them separate
Not in a complete system
You can only buy per piece
At least that is what I have been told
When you see them online the price is for one blade