Marine Head

[KG]

This post is for any Parker owner w/ the electric marine head onboard. I think I have mine figured out but had a few questions. I did not get any paperwork on the head when the boat was purchased last fall.
I am a little confused as to which hoses are the discharge & suction side of the setup. Is there also a vent hose? One seachest is for suction to the head itself and the other seachest is for discharging the holding tank?
Thanks

 

[POGE]

sorry, I thought this post was about a totally different subject :shock:

 

[ReelyNauti]

laughing my ass of Poge u r way to cool .... i'm still laughing

 

[KG]

HAaa! That is some funny shit.

 

[dcunniff]

I have the manual pump. Trace the hoses. Discharge would have a Y valve for the holding tank or overboard likely. Pump may have direction indication.

There is more to explain but it is pretty easy to trace.
Keep the entertainment going too.

Dana

 

[CapeCodFrank]

I have a 2007 model 2510. I have a Jabsco Model 37010-0090 On mine, the intake line is below the helm next to the holding tank. The discharge is just in front of the head. The intake line is vented. A push-button switch activates the pump to pull seawater through the intake line. There is a keyed switch which causes the pump to empty the holding tank through the discharge port. Hope this helps.