Replacing gaskets and seals

[brightlights]

My 1999 2310 has rubber seals around the thru hull fittings (drain plugs) that are deteriorating......Has anyone ever changed just the gasket (if so where can I buy them) ......Or does it require that the entire thru hull fitting be changed as well....

Also the gaskets around my cuddy screen windows are starting to streak......Where can I get those from?

Thank you in advance for your response.

 

[Bryan 2530]

For the through hulls, there is no gasket to be bought, you need to remove them, clean all mating surfaces, then re-bed in an underwater caulk like 3M 5200 or Life Caulk.

As for the screens, figure out which windows you have, probably Beckson but not sure in your vintage and check with marine distributors like Defender Marine or the like.

 

[TimC2520]

Are you talking about the scuppers on the transom?
I'm not sure you can buy just the gasket, but who knows.
I have never seen just them for sale.

 

[brightlights]

I am not being exact in my description and for that I apologize. The seal I am referring to is black, it acts as a barrier and it prevents water from coming back up the thru hulls that empty out the livewell and the center box .

Thanks again

 

[Cork]

I think you are looking for a scupper valve.

I believe this is an exact replacement.....
http://www.attwoodmarine.com/store/prod ... eplacement

here is another vendor....
http://www.sea-dog.com/groups/2066-scupper-valve

 

[brightlights]

I think you are looking for a scupper valve.

I believe this is an exact replacement.....
http://www.attwoodmarine.com/store/prod ... eplacement

here is another vendor....
http://www.sea-dog.com/groups/2066-scupper-valve

Thanks CORK, I am much obliged.....

 

[Bryan 2530]

Just an FYI, Through hull fittings, drain plugs and scuppers are all very different things.

Glad it was figured out though.