Rocker Switches

[Keith FDNY]

Hey guys any suggestions on a nice clean looking Rocker switch that has a set up of 2 or three in one unit!! I want it to look clean on the front of steering wheel panel!!I would love to have something that would match my other trim tabs set up!!But if i have to just put rocker next to rocker that will be fine.Reason for this is that i have to have switch for Under water lites and other is for my under gunnel leds!! I had no spares on factory panel and i added a lite above pilot house door for the deck but didnt want to tie it in with lites that are on the corners of the roof so what i did was spliced 1 wiper to other wiper cause that was on separate switches so no it is on 1 switch and i used the other for the lite i added!!So any helpful ideas will be great on any links!!!Thanks again!!

 

[96TL]

The Parker switches are made by Carling Technologies. I'm not sure if they will deal with the public directly, but you can try.

www.carlingtech.com

 

[FishPimp]

You can call Scott Cambra at vector imaging.
His stuff rocks and it is totally custom. He will label your panel and back light it if you want.
He sends cut templates and is available when doing the install for assistance.
Here is the link
for the switches he did for me:
http://www.classicparker.com/phpBB2/vie ... ght=#17508

His email is: [email protected]


Good Luck.