Rocket Launcher

[JA5ON]

I'm excited that my new rocket launcher was delievered today. Going to install myself but Parker didn't give me squat with it (Bolts, caulk etc) Can you guys help guide through what tools (drill bits, bolts, washers and the sizes that I need)Going to run to the hardware store today. I got the standard 6 rod launcher for the 2120. Also my boat is not the newer model and does not have the "hump" on the roof, so it is necessary to drill the center mount? I was thinking to secure only the outer 2 will be strong enough and perhaps just caulk the middle mount and hope it stays (dont want water to leak through the roof). What do u guys think? thanks a bunch

 

[Bryan 2530]

I would drill the center, that is alot of pressure on there with a full load.

On my 2530 the bolts for the center come down into the cabin and are hidden behind the dome light in the cabin. The outer ones go through the back of the pilot house behind the bulkhead.

Use big washers.

 

[BradV]

for my custom roof mount rod holder and tower the fabricators both thru bolted through the roof and used cap nuts inside the cabin. They also put 4200 or 5200 on the foot of the base before bolting down. No leaks and it doesnt move.