Set knob on anchor light

[Lucky John]

Since I took delivery of my 2120 in 07 the set knob/screw that holds the white anchor light on the top of the cabin does not hold the light vertical for long. Is there a place I can buy a replacement or do I have to change the whole thing?

 

[pmeggers]

On my 23se I got so fed up with that happening I put a bold right through the swivel mount and affixed it permanently.

Then I broke down and got radar, and got a light bar on the mount.

 

[Lucky John]

Next week the cover is coming off I will probably wind up doing the same thing. It has driven me nuts for 4 years................

 

[pmeggers]

It is a major design flaw.

I had the dealership replace twice before they got fed up with me and bolted it. That worked out nicely for the bridge....not...

If you have radar, consider a stand with a light bar... pricey but looks good.

Since I have been a member for a long time, and can't upload pics, I will keep trying and get one up.

 

[pmeggers]

I think it worked...

 

[ultrasport]

Diddo same on my boat I just drilled out the hole a lil larger put a bolt 2 flat washers, lock nut and wing nut. Never had that problem again.

 

[M5]

I've had the same situation with my 2120..

A bungee cord is holding it now, but this idea sounds good....

Diddo same on my boat I just drilled out the hole a lil larger put a bolt 2 flat washers, lock nut and wing nut. Never had that problem again.

 

[Lucky John]

Well I got to trying to fix this problem. I guess I had the set knob so tight I was unable to get it off. Does anyone know where I can buy the same exact light so the screw holes match up? I will check with my local dealer in the am, otherwise I will just buy a Perko and fill holes with 5200 an install new light over the hole.