trim tabs 21 se

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

georgevazquez

Well-known member
Joined
Apr 30, 2012
Messages
239
Reaction score
2
Location
Islamorada, Florida
I was thinking of installing Bennett Trim Tabs on my 2000 21' se. I was wondering what size tabs are you guys running, and what are the advantages that you have noticed? I keep reading on the internet that they are a must for the 21'se with the 14 degree DR.
Thanks in advaced for your input.
 
I have large 12 x 18, but most have 12 x 12 or 9 x 12. The bigger the less tab is needed. It is all about surface area. And yes, a 21se needs tabs to smooth out the ride.
 
I just went out and measured mine, they are 12X12 and they work great.Tabs are a much needed item on a 21SE and while I'm very satisfied with mine if I was doing a fresh install I would put on larger tabs like the poster above.
 
Megabyte":zjpyydbe said:
18" wide by 12" deep.
Perfect for that boat.

12 x 12 is good, 18 x 12 is great! As windknotnc correctly points out, the larger Trim Tab will generate the same lift when deflected to a smaller angle as a smaller one deflected to a greater angle. This makes for a much better lift to drag ratio.

Tom
Bennett Marine
 
Awesome then thats what im getting 18x12, and i think i might also get the eic5000, its my B-Day nov22 so I guess its time to start hinting to the wife. :roll:
 

Attachments

  • EIC5000.jpg
    EIC5000.jpg
    7 KB
I installed 12X12 lenco tabs on my 21SE. I wish I installed the next size larger! What I did to increase lift was to add on Bennett vertical plates bolted to the edges of the Lenco tabs. It really helped out the performance of the system.
 
I put on Bennett m120 sport tabs works great, nice kit easy to follow instructions. http://www.boemarine.com/
It was suppose to come with the ELECTRONIC INDICATOR CONTROL KIT EIC,,,,missing out of box Called BOE had one in two days from Bennett no questions....
 
Both BOE Marine and Bennett are well known for their extraordinary customer service.
Good to hear you were the recipient of their CS.
 
Back
Top