Wynne to diamond sea glaze

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FlyingConnie

Active member
Joined
Oct 29, 2006
Messages
27
Reaction score
0
Location
Westcott Cove CT.
I'm changing out my two forward windsheild from wynne to diamond sea glaze. Anyone know the size? I don't want to pull these out, I'm trying to keep the boat weather tight till the new windows arrive. What should I expect to pay per window (106T)?
Thanks
 
I can't answer your questions, but this is an upgrade i'd like to do to my boat as well!
In fact, I'd like to do my front and side windows both at the same time. 8)

If you need help with the window size... give the factory a call at 252-728-5621

Post project photos so we can all see how it is done!
 
This is a subject I am very interested in. The port side gasket is loose on the lower left corner of the windshield. I have a 2003 2120 SC and it has the alluminum windows. I would like to put a tilt out on the port like I have on the Starboard. I will be interested in your findings of prices. What is the differance between a wayne and diamond sea glaze window? Thanks
 
Ok, this what I've found out so far: Diamond sea glaze is far superior to wynne. The wynne windows have near leaked in a heavy sea since I bought the boat. The diamond 106t are doubled sealed. H&H propeller is the only Northeast dealer, noone else to use. The price for a top hindged 1/4'' glassed window is in the $700 per window range. Little steep for my blood, so I'm leaning toward fixed windows (non-opening) for approx $300 a window. Side windows are siding and I'm afraid to ask how much. I'll call parker tommorrow on sizes. Would you guys be interested in a group buy if it saves money?
 
FlyingConnie":166675qo said:
Would you guys be interested in a group buy if it saves money?

I would... but can we wait until after the holidays to see if I have any money left that I can invest in the boat? :shock:
 
Mega,
I'm not getting shrinked wrapped till xmas. While wrapped I'll pull the old one out, draw the opening then order early Jan. Don't want to wait to long cause theres a 8 to 10 week turn around.
I'm also replacing my Bomar (forward skyligh)t hatch got prices from $279 to $230 this weekend only Hamilton has them for $170. Deal end Sun 12/7 internet only.
 
Back
Top