willyboy
Member
Does anyone know who makes the sliding windows in the pilot house? If so I need to order the felt track that the window slides in can't seem to find it anywhere online...
2000 Parker 2520 sliding window parts
- Thread starter willyboy
- Start date
Help Support Classic Parker Boat Forum:
Reach out to member jpg1969 He knows. The name escapes me right now but they are a different manufacturer than the front windows.
Brent
Well-known member
- Joined
- Mar 19, 2008
- Messages
- 6,091
- Reaction score
- 169
rwp48
Well-known member
Mine are Diamond Seaglaze.
Boat is a 2002 2520 w/ full transom.
Boat is a 2002 2520 w/ full transom.
Just checked his post,they are Pompanette's (side and rear).
----------------------------------------------------------------------------------------
From his previous post......
BTW, only your front windows are DSG. The sides and back are Pompanette. This is confirmed by the factory and DSG. It's a cost saving measure as Pompanette are less expensive.
_________________
Jim G.
2002 2520 MVSC "Lesa Elaine"
Home: Montgomeryville, PA
Port: Port Norris, NJ
----------------------------------------------------------------------------------------
From his previous post......
BTW, only your front windows are DSG. The sides and back are Pompanette. This is confirmed by the factory and DSG. It's a cost saving measure as Pompanette are less expensive.
_________________
Jim G.
2002 2520 MVSC "Lesa Elaine"
Home: Montgomeryville, PA
Port: Port Norris, NJ
jpg1969
Well-known member
Window Manufacturers for 2X20/30 Sport Cabins
Approx. pre-2002 ("Black" painted anodized aluminum trim windows):
Front: Wynne Inc.
Sides/Rear: Water Bonnet
2002 - Present Day (Non-painted anonodized aluminum trim windows):
Front: Diamond Sea Glaze
Sides/Rear: Pompanette
Approx. pre-2002 ("Black" painted anodized aluminum trim windows):
Front: Wynne Inc.
Sides/Rear: Water Bonnet
2002 - Present Day (Non-painted anonodized aluminum trim windows):
Front: Diamond Sea Glaze
Sides/Rear: Pompanette
rwp48
Well-known member
Pretty sure my side and rear windows have Diamond Seaglaze labels. I'll check next time I'm on the boat.
jpg1969
Well-known member
Negative....I just replaced all of mine with DSG windows. Parker uses DSG only for the front due to higher costs. The Pompanette's are a lower priced window. Trust me on this one as I did quite a bit of research including conversations with the factory on what they install/installedrwp48":1koyzg0w said:
.Here's a DSG Sliding Window:
Here's Pompanette (model Parker installs today):
Attachments
Luv2fish
Well-known member
Did anyone ever find the replacement felt track for the original windows? I'm looking to replace mine too but hate to replace the entire window.
Steve
Steve
willyboy
Member
water bonnet made the side windows (black frame) which went out of business and taylor made bought them. i called taylor made and they couldn't help me.... i tried a good 10 different rubber felt channel inserts for windows and i found that the GC310 Slider Channel for Model 310 on wynne windows works for the old water bonnet windows. you just have to cut your own drain holes in the channel insert.
MV Tall Tails
Active member
Luv2fish":1hjwfwax said:
I bought all new gaskets from this guy:
Marine Glass Specialties,Inc.
George Rietheimer President
7801 Colley Rd. Odessa FL. 33556
Phone 813-926-3717
Fax 813-926-8938
E-Mail [email protected]
Web: marineglassspecialties.com
Expensive but the only option I know of without replacing the windows. He bought all of the supply when Water Bonnet went out of business.
Brent
Well-known member
- Joined
- Mar 19, 2008
- Messages
- 6,091
- Reaction score
- 169
willyboy":7pcub13w said:
willyboy":1jl4taij said:
The 2013 Parker 2520 XLD has Taylor-Made side windows in the pilothouse (good luck dealing with Taylor-Made; they are pathetic)... The front windows are Diamond Seaglaze. The back non-opening windows in the pilothouse are Taylor-Made. Again, this is on a 2013 Parker 2520 XLD.
Bomar front and berth hatch. The rest are Taylor on mine.
