Search results

Yesterday completed the job on my 2120, quick & simple, hardest part was drilling the 3" hole through the pulpit for the rode. Question is on the wiring, do I need to be directly to the battery or can I wire the hot lead to the battery switch so that it becomes switched with the rest of the...

I also clamped it on, why drill more holes

I have an 08 2120 and know this all too well, the kids dropped some food on the floor and washed/pushed it down the drain during the 4th of July weekend, smelled like *@&Q$ for a couple of days, I flushed the bilge with fresh water and did a beach and water bath, all gone.......

with ethanol, its from the vent cap on the side of the hull. did i wipe it down or hose it down after it overflowed no, but maybe thats where i went wrong

I have it too. tried compound with a wheel, cleaner waxes ect, still there.

Yes, it's not mine but I saw it at a boat show 2 years ago

thanks

Just purchased a lewmar profish 700, now comes the rode, how much will the locker hold without obstructions in my 2120?

No I did not, it was a left over from my old boat, but easily made

I swapped out the stock 30 degree holder for a 90 and added a second 90 degree holder, makes it removeable and i like it on the gunnel out of the way as opposed to over the motor or in the motor well, this is a 2120

I agree "What i did was silicon and use a clam shell where the wires run thru the holes. I never run boat with front windows open, sides yes." Unless it is mirror calm a little wind spray always seems to make it in the front windows when they are open. Then you spend the last part of the day...

2120, see this thread http://www.classicparker.com/phpBB2/vie ... highlight=

I have one, going on its third year, love it

My second anchor is a smaller wreck anchor that I stow behind the port bench seat in the cabin (in the corner basically under the gunnel where the gas tank feed line is). The line is stowed in the hatch under the starboard v- birth. When I know I will be double anchoring (unusual for me) I...

bigeye2k, what make and model?

I saw that pix in their book but I have a pulpit, Tom just sent me this but its on a 25', I believe it would have the same look.

Has anyone mounted a GOOD AUTOMATIC WINDLASS on a 2120? Pictures of the install would help http://www.goodwindlass.com/Products/ro ... 50windlass

Place was empty, was there yesterday afternoon, save the trip/money.

2008 2120 150 4 stroke

Anchor locker drains into the bilge. I have this same set up with the 150 4-stroke. not exact numbers but I cruse (usually with a full tank of fuel) 2-3 guys and a 30+ gal livewell that is full between 18.5-22knots at 4000-4400, not exact numbers here. if you play with the tabs ect I am sure...