Search results

lookin for a new prop. i was topping out at 32 knts/~4600rpm with my 1998 21 se with two people total and a40 gallons of gas. seems kinda low considering 175hp two stroke. any recomendations for pitch/diameter, im looking to get a little more top end.

thanks, I will take some more pics later and post. the crack starts on the port side box, on the top where it meets the transom, and continues along the seam as a hairline crack along the joint down towards the floor and into scupper well. there is a much narrower crack on the starbord side...

striper swiper - how is the SEI unit holding up?

http://img863.imageshack.us/i/crack.jpg/ do either of these work?

Unwrapped the shrink wrap on my 98 21se this week and noticed two very large cracks where the transom joins the port and starboard compartments on the top side. the crack continues from the topside down to the floor, only a hairline crack by the floor. is this due to water intrusion or sign...

Unwrapped the shrink wrap on my 98 21se this week and noticed two very large cracks where the transom joins the port and starboard compartments on the top side. the crack continues from the topside down to the floor, only a hairline crack by the floor. is this due to water intrusion or sign...

I noticed the Jones Bros 1910 has an optional poling platform, can you put one on a 21 SE ? the parker is 500lbs heavier and has more beam, would it be too much to pole?

Thanks.

looking to get a new prop on my 1998 21se, has a 1998 150 two stroke, anybody have some recs? looking to maximize fuel economy.

got it thanks. have not received a response from parker, does anyone know what the depth dimension for the fuel tank in a 1998 21SE is?

Thanks, which WEMA device did you use? I checked the WEMA website and found only these.... http://www.wemausa.com/tank_sensors/tan ... nk_Sensors they look great, but i was looking at a fully mechanical unit from moeller which requires no wiring or electrical power, does WEMA make one like...

I am considering replacing my broken electrical sending unit with a mechanical one that connects directly to the tank, in the hope that it will be more reliable. There is already a hatch above the tank installed. Does anyone have any experience with these? If so, what size would a 1998 21 SE...

here it is again... reduced to $16,900! great deal http://www.thehulltruth.com/forums/thre ... 60&start=1

bought Whitecap's old windsheild. Can't wait to install it, should work out well. thanks Whitecap.

im not the seller, but thought people might be interested..... http://www.reel-time.com/forum/showthread.php?t=61424

that appears to be the same console as on my 21. I've sent you a PM. thanks.

I recently purchased a 98 parker 21se and the leaning post is missing the slide in upholstery. Does anyone know where i can purchase an aftermarket fabrication or replacement?

does anyone know where i can find a replacement winsdheild for my 1998 21SE?

want to install a pair of taco rod holders on my 98' 21 SE. Can i mount them directly to the posts under the gunnels or will this compromise the strength of the hull in the long run making them more succeptible to rot? I imagine if I use some 5200 sealant things should be fine?