Search results

John, I have a 94 DV project hull and plywood fiberglass and epoxy. Not sure if you’d be interested. I don’t have time to finish and need to focus on my business

I suppose. looks enough like a bracket for me, and this is what all these folks are calling them.

No bolts, will be tabbed on boat, and the stringers will run through the ransom and be tied into bracket. Got the idea from DayTrip on the hull truth. Mold for bracket is complete, going to be cutting my layers of fiberglass for the bracket tonight. Doubt I’ll have enough time to do any epoxy…

Correct me if I am wrong as I have never had a bracketed boat… I’m working on the mold and cutting it down for the height needed. The motors’ lower unit should be inline/level with the keel of the boat correct? Hoping to get first section of new transom skin on this coming weekend. Got some...

What shaft length do we need for out boats? I have the mold half framed up need to cut down sides and clamping board. Matt

Looks great! I have high hopes that this will be done quickly, but sooner than later I’m sure I’ll run into reality

Originally mine came with twin mariners. The notch in the transom is about twice as large as it’d be with a single. I wanted to have full transom and bracket to add more room for fishing/ freeboard. Another thing was the original owner put a livewell in The floor that was installed wrong, which...

Not sure if this will post to the whole forum or not… Is anyone on here a guru with composites? Trying to weigh the options of replacing transom, stringers, and deck with composites rather than plywood. The wood has lasted very well and the transom was only rotten on the bottom 2” of the...

Whenever you get a chance can you get some performance numbers with the 300? My plan is to go with the same. Thanks!

Is that wide open or cruise? Do you have a bracket?

Curious what your performance numbers are with the 300? Trying to decide between that and a 250. Thanks!

Sorry didn’t think of that had to landscape all day and at my full time job today. Tomorrow I got a day off to work on the boat, I got you tomorrow

36.5 ish x 49 ish…

Indeed, may be a little cracked. Working today I’ll take a picture tomorrow.

I have a bow rail and console for sale let me know if interested.

Had three hours to work on the boat this morning after getting off shift. Got a good bit done. Back of the deck is rotten as crap so that’ll be fun to deal with, the in floor live well just needs to be pulled along with the other sections. Hope to get fuel tank and rest of deck out one night...

Everything lol. I’ve got a pretty good idea for how to build the jig thanks to the guys on the hull truth. L x w of platform how high is the clamping board from bottom of hull?angles of the brackets “v” so pretty much everything. I know it’s a big ask but any measurements are appreciated. Also...

So finally picked up the boat yesterday after two months or so trying to get up with the guy. it came with a soft spot in the deck, so that’s on the list to do. Also has a cut transom due to the twin 115s it came with. So that will need to be filled in. If stringers are good they’re staying in...

John did you sell the boat?

Hey man, nice progress. I know it’s been a while. Did you end up doing a full rebuild/ were your stringers good? Got a 96 I’m picking up and I anticipate I will be following in your footsteps. Let me know if you have any pointers. Matt