Search results

Mine are more like a 5.5 center area and 6.5 outside diameter including the hold down ring. I’ll post measurements tomorrow.

That is correct 😂 mainly because I’m 45 min from the boat and read on here what everyone used so now I’ll go measure.

Yes on my boat it’s bigger than a 4 inch. I ordered the 4 inch ones and they showed up and the outer ring with the screw holes in it is basically the same size as the center area so it almost falls through into the tank area

Well as I stated before the boat bilhe had filled up with fresh rainwater and spilled over the top into the fuel tank area. I had a fan going for a few days and seem to dry it up but now that the boat has been transported down for the new engine finally all the up and down on the hills must have...

I actually have those and the ones on the deck are way bigger. Those ones fit the back corners for the wires run from the bilge up under the gun holes. Hmmm

Trying to replace the two round deck hatches on my 08 2320. I’ve seen people use a aluminum one for the bilge but what’s the best replacement for the round ones? Mine are warped and missing the gaskets. The ones at west marine will require trimming of the hole. Is there any direct replacement?

I have guide bunks that have an adjuster bolt so they can be moved out further or completely for washing etc.

@josh. What he said ^ I also had twin stations with cables and man did it suck. Never could get the second station on this boat perfectly in sync I was told by the previous owner. My last boat had the standard digital Yamaha controls and truthfully I really loved it but it definitely seem tall...

From my understanding they are no longer making the previous model which is why I went all new. You might be able to find the previous at a local shop or eBay if they have old stock laying around. I personally like the look and the feel of the newer design better.

After re-reading it three times if you’re referring to upgrade as an a brand new boat vs repower no you cannot get bigger than twin 200s at this time. Engine options outborad 1 х 300 л.с. Yamaha F300 outborad 2 х 150 л.с. Yamaha 150 outborad 2 х 200 л.с. Yamaha 200 Those are the current...

Yeah that’s it! I wish it sucked air out instead of putting it down in but it actually works really well. I reach my hand as far back as I could and it’s dry as a bone it seems for now.

I just spoke with my marine mechanic buddy and he said he has seen a few that had 300s but whatever your boat is stickered for is what you need to go by as that’s what Coast Guard approved. Also he said it might get denied during insurance or if there’s some sort of an accident God forbid you...

OK I see what you were saying now. I’m at a loss it looks like Parker even in 2023 is now back to 500 hp. Maybe there was a limited number of them that had twin 300 just like there used to be twin engine 2320 🤷🏻‍♂️ I know for 100% fact I specked one out from the factory that was rated for it and...

What year is your boat? The 2520 I was standing on last has a sticker that says it is rated for max horsepower of 600

Yea you would just need the second station and wiring. And I have a second push start button

The factory won’t go over the max rating for warranty and safety. That being said, when I specked out a new 2520 in 2018 twin 300s was an option. I’ll see if I still have the build sheet. What year is yours?

Here is what is needed for a digital engine as far as wiring and controls. The steering is basically like Nrender said. Mine has T fittings under the gunnel on the deck in the hydraulic lines going to the second station. . 0 1 0 0 6X9-48205-00-00 YA SINGLE MAIN DEC REM. CNTRL $1,228.24 0 1 0 0...

Thats interesting. Most of the deep V 2520's in san diego ive been on/seen are twin 300s. That being said they are newer as in 2015 to present but the marina my boss has his boat in has a couple 2008 2520's with twin 300s

I ended up finding this solar fan on Amazon and it fits right in the hole. Works great! Next step is to mount the new engine and repaint my deck 🙌🏻

I always epoxy the wood because I’m paranoid lol That is a cool fan idea. Now I guess another question is how necessary it might be as my boat is kept under a cover and in a garage?