Search results

I close the sea cock, then where the water comes out in tbe livewell you undo the attachment and can thread a hose on there. Hose needs to be 3/4 an inch. I put a hose on the wash down and then I turn on the wash down, dump antifreeze down the hose attached with a funnel to my livewell. The...

Yea it’s a livewell, I don’t care if it is not cosmetically pleasing just don’t want to have problems leaking water….. Thank you

Thank you, i was worried about water intrusion below the seat. Why I asked about repairing it I can also repair wirh marine Tex or loctite epoxy no?

I was winterizing my boat and putting antifreeze through the pump down and noticed a chip inside my live well. No clue how this could of happened. Can I just fill it with epoxy and packing tape over it and sand a little to blend. Boat is a 2021 Parker 21se

Yes you just mark and drill. I am scared to drill my t top lol

Here are the install directions http://rnr-marine.com/Install_T-Top-Spray-Shield.shtml

So this comes with the snaps built into the canvas. I would have to put the snaps into my t top I believe to receive the snaps from the canvas on the other end

Honestly at $475 if I have problems with it can order and swap in a new one…… Once the snaps are there it’s a straight swap. That’s my thinking vs going custom…

Thank you.

That’s website I posted has an option to upgrade to stamoid…. Wouldn’t it be a good move to order pre made from the site and maybe pay a local installer

Love my 21se but when it’s cold out or raining wish I had some protection. I saw this company that sell an eisenglass enclosure for $479 T-Top Spray-Shield, 3-Window (Factory OEM) for Parker® 21SE (2000-current) from RNR-Marine.com™ (p/n: T-Top-Spray-Shield-3Win-OEM-A1). Anyone have...

It’s about $200 in parts and 3 hours of work. all the basic 100 hour services like filters and oil I do myself. Simyamaha sells a kit it’s $100. Super easy to do….

In fairfield county area nesr nyc a lot of evinrude shops are moving over to Suzuki. Suzuki also 20% chesper than the Yamahas here

Make sure to change out the underwater lights and get a better transducer. The transducer that comes stock doesn’t do chirp or side scan. Also all tbe painted screws around the deck replace with hood 316 screws

Yea that was the approach I was going to take on that scratch dab it in with a brush then wet sand going from 200 to 1000. I found someone who does gel coat for a living and may fix it for $100.

No painted screws holding live well and kick plate…… My rub rail screws through the hell are also rusting and my transom rings are as well. They use crap hardware and accessories on the boat

Its mounted on the starboard side.......Its tough for me to find pics of the transom with the boat out of the water. I would suggest using a transom saver. I also updated my boat to have Macris underwater lights. The stuff they put on the parker boats stock is junk..... If you look close in...

This is what I did.

The dealer told me that the non skid is same color as the exterior of the boat and the reason that the non skid looks a different color is because the non skid has grip added to the paint. If you are saying non skid will add a little black then maybe it is right because the advice I got from a...

Ok I think I got an approach. I was told by the dealer the gel coat for the non skid is the same as the non skis except the non skid has the sand in the gel coat giving it a little darker appearance. I am going to buy wax adder for fiberglass, I have the gel coat without the wax, Mekp in a...