23 SE, Livewell 2 switch?

[Bodick93]

Those of you that have this switch, but 1 livewell, what does the "livewell 2" switch power? Boat is a new 2023. Livewell 1 switch starts the pump and turns on the livewell LED. I was thinking it may be a timer, but I left it on for probably 5 minutes and nothing happened. It has wires (other than the daisy chains) coming off the back of the switch, one of which was brown.
I can figure it out, but one you guys surely already know.

Thanks!

 

[pelagic2530]

Those of you that have this switch, but 1 livewell, what does the "livewell 2" switch power? Boat is a new 2023. Livewell 1 switch starts the pump and turns on the livewell LED. I was thinking it may be a timer, but I left it on for probably 5 minutes and nothing happened. It has wires (other than the daisy chains) coming off the back of the switch, one of which was brown.
I can figure it out, but one you guys surely already know.

Thanks!

Probably just a bare switch in a standard harness that’s for an optional second livewell that your boat isn’t equipped with.

 

[Bodick93]

It's not bare, that's what I expected.

 

[pelagic2530]

It's not bare, that's what I expected.

Right, it probably has wires coming off it going into the harness. Those wires probably dead end under a bulkhead somewhere close to where the other livewell would be.

Parker uses a standard wiring harness like most other manufacturers. They just don’t hook up the wires for options that you didn’t buy. So, the switch at the panel will have wires connected to the harness- they just don’t go anywhere.