2320 rod holder question

[Capt.Matt]

I currently own a 2320 parker and keep it in dry storage so due to weather (in florida) I do not have access to it rite now and most likely will not for at least a good few days so I was wondering if someone could happen to tell me the distance between the two rear most rod holders in the gunnel. i.e if you were to stick a 1.5" tube in each how long of a piece would be required to connect the two. (can anyone sense a project brewing :lol: :lol: )

Thanks,

Capt. Matt

 

[shawnee83]

I know that you are looking for exact but I think it's about 96". Total beam is 8'6" and I believe that's from rubrail to rebrail? Those holders are about 3" in from the rubrails so that's where I came up with the 96". That should be very close anyway.

 

[Capt.Matt]

I know that you are looking for exact but I think it's about 96". Total beam is 8'6" and I believe that's from rubrail to rebrail? Those holders are about 3" in from the rubrails so that's where I came up with the 96". That should be very close anyway.

Awesome. Thank you I appreciate that.

Capt. Matt

 

[Capt.Matt]

Does anybody happen to know the degree of tilt the rear rod holder is at?? Im thinking 30 degree but not sure

 

[Megabyte]

Does anybody happen to know the degree of tilt the rear rod holder is at?? Im thinking 30 degree but not sure

Yes, they are all 30 degree, just rotated.
Aft at 6 o'clock, midship at 45 degrees and forward at 90 degrees.
Here is a photo: