Cleaning up the rat's nest at the helm. Looking for photos/examples...

[Makakio]

Hey All - well, we've started losing some functionality on the electronics to corrosion and rot - and while we are behind the helm (and across the stern) fixing things up we want to clean up the wiring mess from 22 years (and two previous owners) on our 2003 2120 SC. The question: has anyone gone through a process of cleaning things up: bundling, labeling, properly hanging/affixing the wiring - and can provide some pics of their finished work? Always easier to work off photos...

 

[warthog5]

Weld Mounts - https://www.amazon.com/Weld-Mount-L...=se&keywords=weld+mount&qid=1728995101&sr=8-3


https://www.amazon.com/Weld-Mount-A...=se&keywords=weld+mount&qid=1728995101&sr=8-7

You will need the dual plunger for the epoxy.

FORGET the little pads with the double sided tape... They will fall off before you can get out of the driveway.

Clean the surface with rubbing alcohol.... sand with 80gt...clean with alcohol again BEFORE you glue them.

 

[pelagic2530]

Weld Mounts - https://www.amazon.com/Weld-Mount-L...=se&keywords=weld+mount&qid=1728995101&sr=8-3


https://www.amazon.com/Weld-Mount-A...=se&keywords=weld+mount&qid=1728995101&sr=8-7

You will need the dual plunger for the epoxy.

FORGET the little pads with the double sided tape... They will fall off before you can get out of the driveway.

Clean the surface with rubbing alcohol.... sand with 80gt...clean with alcohol again BEFORE you glue them.

Weld Mount is tough to come by these days… it’s been a few months since I needed to restock, but unless things have changed supply is still tight.