Fuel Tank Sender Replacement

[jr]

While removing the fuel tank sender unit so I could siphon out bad gas it became apparent that it needed to be replaced. It was old enough to still have natural cork for the float. My question is does anyone have a recomendation regarding a replacement? The boat has yamaha gauges if that makes any difference.

 

[cbigma]

Hey jr,

Here's a couple of ClassicParker project posts that tackled the fuel sensor replacement.

Fuel Level Sensor and

Fuel Level Sensor Replacement

If you've got the old sensor out without mashing up the screws too badly, you've already done most of the tough work. 8) 8)

Good Luck.

John

 

[jr]

Thanks for the info. After reading those links looks like I should reseat the hatches while I am at it.

 

[Megabyte]

Thanks for the info. After reading those links looks like I should reseat the hatches while I am at it.

I can help with that! Take a look here:
http://www.classicparker.com/phpBB2/viewtopic.php?t=785

 

[DaleH]

Nice!

Can't decide to make the WEMA fuel sender upgrade over the winter or add a full mahogany brightwork transom to my big girl. Hmmmmmmmmm, maybe both !

 

[jr]

To replace the o ring's, should I find a local tempress source or does someone have a cheaper alternative?

 

[cbigma]

I found the easiest way was just to go to the Tempress Website and order them.....Tempress Deck Plate Parts