Parker 2310, Crack in bottom of stringer/bilge area.

[izzy003]

I am in process of cutting out existing 2310 fish box and came across some issues with my front bilge area. The front bottom seam is cracked about 18”, and I can pass a wire through to the forward compartment. I have a small scope that I used for photos on the forward side of the seam, which is at the aft-most section of the cabin floor. The structure/stringer (not sure its called a stringer) is solid, just the bottom communicates. Not sure how to proceed. The seam is only accessible from one side. Grind it out and epoxy/glass it in?

Any help is appreciated.

 

[warthog5]

Clean..... Clean again.......Grind..... Clean again.

Laminate it with 1708 and a layer of 1 1/2oz matt

 

[izzy003]

Thanks for the info. I only have access to that one side…..I’ll give it a go.