repower

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

karenann

Well-known member
Joined
Aug 4, 2015
Messages
112
Reaction score
1
I have 2003 Parker DV CC it has 250 Yamaha 25" shaft on bracket .Could I repower with 30" shaft?
 
There is a section in this forum where we talk about "Raising" the motor....It's talked about a Lot. Raising the motor helps the boat preform better.....and gets better fuel millage. Adding 5in to the motor will defeat that and there is not enough height adjustment. With that 30in motor raised all the way up.....It's still not high enough...

Results will be........It will push the boat......But the boat will be a Pig!
 
Not unless you also replace the bracket with one specific built for a 30" shaft motor.
 
Back
Top