Anyone know where I can find one of these?
It's a 4" size, six screw holes. Can't seem to find a match.
It's a 4" size, six screw holes. Can't seem to find a match.
Rigging Grommet
- Thread starter TimC2520
- Start date
Help Support Classic Parker Boat Forum:
Brent
Well-known member
- Joined
- Mar 19, 2008
- Messages
- 6,091
- Reaction score
- 169
Would a SS exhaust fitting or a thru-hull work?
miky2884
Well-known member
Our West Marine in CT carries them in all sizes.
Do you know if the 4" has the 6 screw holes?
The pics I see online of 4" grommets have 4 screws but I'm thinking maybe that
is just a general photo and the bigger they are, the more screws.
The pics I see online of 4" grommets have 4 screws but I'm thinking maybe that
is just a general photo and the bigger they are, the more screws.
miky2884
Well-known member
If those are the same ones that are used for the rod holders under then gunwale then yes. I replaced mine becuase they became all black and I couldn't get them clean, and the ones I bought have 6 holes.
warthog5
Well-known member
What you want to do is see if you can find a name on them.
Here's a suggestion. Look at TH Marine's website.
http://www.thmarine.com/products
http://www.thmarine.com/products/Riggin ... Cable-Boot
Once you find what your looking for with a part number then search that. That's the way yo get a exact match.
But I'd like to see the motor end of where those connect, because you may be able to clean the whole deal up with a rigging tube like this.
Here's a suggestion. Look at TH Marine's website.
http://www.thmarine.com/products
http://www.thmarine.com/products/Riggin ... Cable-Boot
Once you find what your looking for with a part number then search that. That's the way yo get a exact match.
But I'd like to see the motor end of where those connect, because you may be able to clean the whole deal up with a rigging tube like this.
