Starboard construction material

[HM5]

Here is a link that I found for the correct color material. I orderd some and it is great. 8)
http://cgi.ebay.com/ebaymotors/King...2176233QQptZBoatQ5fPartsQ5fAccessoriesQ5fGear

He also has 3/4 inch material in the same 12 x 54 size.

Also for those who might wish to change/replace the bilge deck hatch similar to what Grouperjim did,
(http://www.classicparker.com/phpBB2/viewtopic.php?t=6466&highlight=beckson),
I just ordered one from Beckson directly at a dramaticaly reduced rate.
Here is the link:
http://www.beckson.com/38hatches.html

Waiting to have it delivered, but color should match.

 

[MaxOut]

Good stuff!

 

[tara11]

I used one of the larger ones with the two handles/locks, make sure you caulk it really good, as mine was leaking where the hinge is, I fixed it, but water seems to get in through the hinge, not a lot, and it is no big deal, but I can not seem to get it 100% water tight, it may be me though, they are perfect other than that.

 

[JTR]

I am looking for a larger piece (half sheet).

I have searched but have not found "fish white" at another distributor.

Does anyone know if "fish white" is equivalent to another color (sea foam, tan, etc.)?

 

[samlauncher]

Appreciated info, its good to know..

 

[ReelyNauti]

The proper name is SEAFOAM not fish white ..... if you look at competitors you will see different names
I had seen that fish white and inquired once too!!! the mfg explained it to me.

http://www.kingstarboard.com/Products/starboard.aspx


The kingstarboard site lists the proper names it competitors use the other name...if you are trying to match the gel coat this is an exact match SEAFOAM!!! assuming the boat is a later model of course...

Sanshade is the darker color you see on the rear fish box lids