swim platform measurements

[In2Deep]

I picked up a used factory swim platform and want to install it on my 1999 2100 DVCC. The boat is equipped with a set of Bennett electronic trim tabs. Some measurements for the deck or holes would be great. Not sure if Ill need to modify the platform to accomodate the tabs? All depends on the positioning of the deck.
thanks,Jerry

 

[ryanc2]

I've got the same model/year boat, and if you can wait a day - i can measure them out tomorrow and post. Just let me know how you want them taken.

 

[In2Deep]

Ryan,
sweet,I guess measure down from the bottom of the rub rail to the top of the deck,then from the rear corner/edge to the outside of the deck? hope this makes sense? thanks

 

[ryanc2]

Hope these help.

 

[In2Deep]

much obliged,thanks Ryan!!

 

[In2Deep]

ok ,got it all measured out,do I need to use thru-bolts,seems I can only use them in the uppermost and lowest holes(access), is it OK to use regular self threading screws(+ 5200) for the other 3 mounting holes??
thanks,Jerry