Trim tabs

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dleopoldi914

Well-known member
Joined
Jun 19, 2021
Messages
200
Reaction score
35
I have a 21se and am getting ready to commission it for the spring.

Hate to ask such a stupid question but if I am going to paint the tabs with eco hrt and replace the zincs….

Do I detach the tabs from the boat so that they hang and then the tab will be 100% vertical then I paint both sides?

I tried to undo the 3 nuts but looks like the one through the side will be the one I want to undo….

I would assume just use a wrench and undo the bolt I circled?

Does that seem right?
 

Attachments

  • F46B11C5-DF69-4C5D-B067-DB285C7F7626.jpeg
    F46B11C5-DF69-4C5D-B067-DB285C7F7626.jpeg
    2.5 MB
  • CAC475BA-4854-48CD-920A-8A980EACE0FD.jpeg
    CAC475BA-4854-48CD-920A-8A980EACE0FD.jpeg
    875 KB
I was able to use a combo of crescent wrenches and ratcheting wrenches and undo the 3 bolts. My tabs are now sitting vertical. I will sand and paint the tabs then put back the 3 screws on each tab
 
Back
Top