Wash Down Problem

[Reelhookedup]

Thanks for all of the help guys, I had the boat out on the lake for the first time today. I have alot of winter projects I did I will post some pics later. I had the dealer install the raw water wash down, but it was done in the winter so it did not get tested in the water. The pump runs but today when it would start to pump water the breaker would kick off on the switch, at the dash. On the side of the pump it states to use a 15 amp fuse. I pulled the braker for the switch that came with the boat from parker and it is a 5 amp :roll: . So I pulled some more one windshield wiper is a 10 amp and the other is a 15 amp why? Not that it maters, I just need to know where I can get the 15amp breaker that parker put on the boat. Thanks Sean

 

[Reelhookedup]

The folks at parker must have been running low on breakers. I found my wiring diagram last night. The boat is a 2009 2320SL, out of all of the breakers on the back of the switch panel only one is the same size as listed on the diagram . So I will have to make some calls monday and find out why. For example the STBD WIPER 15AMP the Port wiper 10amp, on the diagram they should both be 5amp. I dont know if it makes a difference but I would like to know. I dont want to burn something out. Thanks Sean

 

[Reelhookedup]

Also on the diagram it calls for a 15amp breaker for the wash down, they had a 5amp.

 

[parkerjon]

With all the downsizing companies are doing. They may have resorted to multi-tasking. The gelcoat guy was probably assigned to your wiring.