raysbigfish
Active member
- Joined
- Feb 25, 2007
- Messages
- 27
- Reaction score
- 1
I have 2 Marinco Wiper Motor 1000 Series both single speed, i wouldn’t get the benefit of fast speed, correct?
Window wiper delay
- Thread starter A-K
- Start date
Help Support Classic Parker Boat Forum:
I think that is correct. The controller is creating 5 speeds (slow, fast, and three different delay options). A single speed motor wouldn't have two inputs available for the controller to use.
If you have three male spade connectors they should be fast, slow and park.
Completed the install and it works perfectly. Appreciate Antidote's write up, everything was spot on.
You can see the three posts on the front of the motor in this picture. The factory hot wire is on the "high speed" stud. The one right next to it is the "slow speed", and the stud slightly behind and by itself is the "park". The lock nut is a 5.5mm. Might help someone else who attempts the same project.
You can see the three posts on the front of the motor in this picture. The factory hot wire is on the "high speed" stud. The one right next to it is the "slow speed", and the stud slightly behind and by itself is the "park". The lock nut is a 5.5mm. Might help someone else who attempts the same project.
Last edited:
