Search results

I could be the valves in the helm sticking. What happens if you shake the wheel side to side when you're in the dead spot? By that I mean turn the wheel back and forth.

My 8' antenna has fender washers on the bottom side. I've never noticed any flex

You guys could take "donations" for your time and materials.

.

All the senders are the same standard. All you have to do is measure the depth of the tank and select the sender you would like. My tank is 16.25" deep. I put in a 16" sender. When the bottom bar starts flashing it will get quiet very soon. My tank came with a 13" sender for a "reserve."...

I have the Gemlux Bluewater short handle outriggers on my 2520XLD. No head bumps yet after 3years.

I’m on the East coast; but, you might get more results if you offer gas and lunch.

1 and possibly 2 will cause problems for your prop. That leaves 3 and 4.

I can't speak for Mercury's system; however, the Yamaha DEC system is like an autopilot. You never realize how much you wanted it until you have had it. I would go with the DTC.

Still Available?

Damn. Sorry to hear.

It was mounted as per the instructions with 3' of hose between it and any other rigid connection, perfectly horizontal and the gain was moved all around. It would trip the system into "Heading Hold" especially when the A/P was turning to follow a course in "Auto Nav." I found it more dangerous...

I give a vote to leave the shadow drive in the box. It caused nothing but problems with my Garmin AP. It's also one less hose to buy.

Dropped her off yesterday morning. With the short week because of Thanksgiving they plan to tear her down and get the parts ordered this week.

They had nothing to offer. The only comment he gave was that they had no signs of ever overheating. I thought I have been doing everything right to keep these engines happy for a long time.

Well now it's time for the port engine. No hole in cowling yet; but, she sure sounds like the Starboard did just before the hole showed. She goes back to dealer Monday.

This is picture of the drawers and a tackle storage box I made from starboard. The drawers go about 2/3-3/4 the depth of the cabinet so you lose a little space and you also have to add a leg to support the back of the drawers. I later mounted my autopilot pump in the lost space on the deck in...

If it was your bait tank or other open water source it would most likely be a lot more water. Check the rub rail seam.

It's pretty easy. The set up I purchased was for a Garmin MFD with the joy stick controller. The only Glitch is the FLIR uses power from the ethernet connections, which Garmin can't supply. The kit comes with two power adapters to give the needed power to the camera and controller. You also...

Cost mostly. I bought the high resolution, fixed base, with the controller. MD625.