Search results

so are the actuators off center on the tab? or are they the 18"long ( out from the stern ) ? I have thought about trying a wider tab w/o relocating the actuators ( off center ) but have not got there. Seems as long as the tab itself is rigid enough some off center might not be a issue.

Thanks for the reply. I had watched that one before, good info there. Turns out Yamaha has upgraded the caps and seals . The new cap has both a oring and a lip seal for the ram seals . Not sure if the old has a internal oring groove inside or not as I have not dissasembled them yet. The new caps...

So it's time to fix the slow leaker on my tilt ram(s). I have the factory book and the beefy removal tool from Marine Tech. From looking at the book it looks like the seals are replaceable although they are called "dust seals" which makes me wonder if the oil seals are part of the cap? I looked...

I agree w/ Gsully23, this is a internal problem . What parts are back ordered, because if its the wear plates they are waiting on you will not fix this when they show. If that is what they are waiting on I would get in there face and tell them to get to the bottom of the problem. IF this was my...

thanks, will do.

Because that boat is low hour and all seems well electrically w/ the switch I may try to replace the bulb . Do I need the cover removal tool or does the cover just snap off the switch body if pried gently ? If I do need the tool I will buy a couple switches also assuming the horizontal switch is...

guys, thanks for all the posts.

thanks guys, best i can do w/o disassembly . On the single throw switch the light is in the first groove left of center

oem switch for wash-down on my 2012 2520xld no longer lights up when on. Are the bulbs replaceable? It appears they are small incandescent bulbs behind the switch rocker but maybe led. Any info appreciated.

So from the pics here I see a groco valve that I believe is their chrome plated brass ball model and a perko valve that I cannot seem to find info on the ball material , but by the cost I would guess stainless . Groco makes the big $ stainless ball model also. So the question is , in this fairly...

you might want to look at Versa Tube also. The Admiral and I built this one , the kit was impressive .

thanks!

was the hatch brand listed in the build? did I miss it?

2530 , nice work in your thread there. Do you think bolts up from under the backing plate epoxied in as studs would work for the seacock? also what is the brand on the bilge hatch , and does it really seal ? I sure dont like the oem deck hatch on my boat but have not found anything better in...

thanks, will do.

My 2012 2520xld has never had a through hull for bait tank installed in the rear bilge area. What parts and what location work well for you guys? I am looking for recommendations specifically for a my model with a single outboard mounted on the standard bracket. I did a search and found some...

Adding length is popular here on the west coast to commercial dive boats , radons , andersons , wilsons ect. Most of these seem to just be better overall after even though most are 8.5 foot beam and streached to 30+ feet. I suspect they lose a bit in drift stability but gain in efficiency. My...

thanks

can you direct me to this info, I am interested , thanks!

I did in a buddies sea ray. we put a garmin transducer in toilet wax in the center of the hull and were blown away how well it works. still to this day it is as we did it just for a test. yrmv but i would consider trying it due to the ease of install and nothing is permanent. lmk if u want more...