Deck Plate "O" Rings

[Inshore Chaser]

Has anyone found a source for Innovative Product Solutions replacement "O" rings for their pry off deckplates? The IPS website was no help. IPS were the OEM deckplates on 2021 Parkers.

 

[Bodick93]

Napa can probably make them, but aside from that, "glue" them down with white lifeseal. They come up with only slightly more effort, and the bead of lifeseal peels off almost in one piece. Do what you need to do and reseal them. Of course replace the "O" rings too.

 

[Antidote]

https://www.amazon.com/256-Buna-N-R...d=1730112140&sprefix=6"+brings,aps,107&sr=8-9

 

[Jason Currier]

Napa can probably make them, but aside from that, "glue" them down with white lifeseal. They come up with only slightly more effort, and the bead of lifeseal peels off almost in one piece. Do what you need to do and reseal them. Of course replace the "O" rings too.

When you guys are sealing these with LifeSeal do you put a bead down and seal the ring into it or seal from the top once its on?

 

[Bodick93]

When you guys are sealing these with LifeSeal do you put a bead down and seal the ring into it or seal from the top once its on?

Pull the cap, then put a bead around the uppermost inner rim of the base. Center it well and snap it down. Lifeseal has a silicone component to it, pretty cool to work with. Pop it back up after a day or two and see how it sealed, for your confidence in the method. Also, just push the plug backward out of the nozzle after it cures and you can use the same tube for a long time.

 

[Bodick93]

I will add that I have the type of cap that covers the whole fixture, vs the cap sitting down into the cavity.