We all know bronze is soft. A pipe wrench teeth easily eat away at a stubborn plug. An extractor isn't going to break off in the bronze, it'll just keep chewing it up. I haven't had that happen yet but luckily since that techs been gone we haven't run into the problem this year during haul out season up here. I've also found if the plugs in good shape a 12 point socket fits nicely and will usaully get the job done.
Drain plug stuck, help
- Thread starter POGE
- Start date
Help Support Classic Parker Boat Forum:
We all know bronze is soft. A pipe wrench teeth easily eat away at a stubborn plug. An extractor isn't going to break off in the bronze, it'll just keep chewing it up. I haven't had that happen yet but luckily since that techs been gone we haven't run into the problem this year during haul out season up here. I've also found if the plugs in good shape a 12 point socket fits nicely and will usaully get the job done.
I've used Teflon paste sealant on the plugs for years & never had a problem with leaks or removal.
https://www.homedepot.com/p/Hercules-Real-Tuff-4-oz-Pipe-Thread-Sealant-156152/203304169
