96TL
Well-known member
Porkchunker":196q5oie said:
Yes, I thru-bolted them and used fender washers. I have long arms, but it was still a pain. It would've been much easier with 2 people.
Misc springtime mods (Lots of pics!)
- Thread starter 96TL
- Start date
Help Support Classic Parker Boat Forum:
Yes, I thru-bolted them and used fender washers. I have long arms, but it was still a pain. It would've been much easier with 2 people.
cbigma
Well-known member
Dom,
Way to go! A whole smorgasbord of projects in a very busy spring prep for you! All of those upgrades are very practical and each one has reminded one or two of us of stuff we are meaning to get at on our own rigs. Nice Job!
Way to go! A whole smorgasbord of projects in a very busy spring prep for you! All of those upgrades are very practical and each one has reminded one or two of us of stuff we are meaning to get at on our own rigs. Nice Job!
Dom, That WaterWitch bilge monitor you installed has been an item on my list for awhile now.
I was thinking of sinking the panel into one of the starboard 'access doors' in my transom...
Do you know if that panel is weatherproof?
I was thinking of sinking the panel into one of the starboard 'access doors' in my transom...
Do you know if that panel is weatherproof?
96TL
Well-known member
Megabyte":2uqqoed7 said:
It certainly looks and feels weatherproof. I'm not 100% sure though. I'm sure Water Witch could tell you. They're really helpful. I had a lot of questions before I bought it.
DaleH
FOUNDER of Classic Parker Forum
Kevin:
Water Witch http://www.waterwitchinc.com/index.html makes simple 2-1/4" bilge COUNTERS that should be able to be put under the transom washboards up in the stern. Leaves your existing on/off wiring and alarm switches intact - should be a simpler install.
* Microprocessor controlled
* No moving parts to wear out
* Count illuminates in L.E.D. display when pump runs
* Tracks pump cycles for preceding 14 days
* Displays total pump cycles since last reset, followed by pump cycles for the previous 24 hr, 7 & 14 day periods
* Data is always current -updates pump totals every 24hrs
* Flashing count signifies a power loss for that time period, indicating the count could be inaccurate
* Exceeds both United States Coast Guard and U.L. Standards
Only $56, click HERE.
Water Witch http://www.waterwitchinc.com/index.html makes simple 2-1/4" bilge COUNTERS that should be able to be put under the transom washboards up in the stern. Leaves your existing on/off wiring and alarm switches intact - should be a simpler install.
* Microprocessor controlled
* No moving parts to wear out
* Count illuminates in L.E.D. display when pump runs
* Tracks pump cycles for preceding 14 days
* Displays total pump cycles since last reset, followed by pump cycles for the previous 24 hr, 7 & 14 day periods
* Data is always current -updates pump totals every 24hrs
* Flashing count signifies a power loss for that time period, indicating the count could be inaccurate
* Exceeds both United States Coast Guard and U.L. Standards
Only $56, click HERE.
Robert Cibran
Well-known member
Anna Bella,
By the pictures you posted of the racor filter I see its a S3213 which Racor rates at 60 GPH,My Yamaha 250 HP 4 stroke (2300CC DV) came with a Yamaha 10 Micron 90 GPH fuel filter from the Parker factory.My question is, Does this matter ?? to have 60 GPH when they come from the factory with 90 GPH.
Robert Cibran
2300CC DV
By the pictures you posted of the racor filter I see its a S3213 which Racor rates at 60 GPH,My Yamaha 250 HP 4 stroke (2300CC DV) came with a Yamaha 10 Micron 90 GPH fuel filter from the Parker factory.My question is, Does this matter ?? to have 60 GPH when they come from the factory with 90 GPH.
Robert Cibran
2300CC DV
96TL
Well-known member
Doesn't matter from what I've been told. The motor runs great with it so far. 8)
Robert Cibran
Well-known member
great to hear that,thinking of changing mine to racor,doing some research,thanks.
robert
robert
man, your cockpit looks like a spaceship with those lights!!!! cool!!! nice work
cool!!! nice work 
5150dude
Well-known member
Nice work!
I am changing out all my lights to LED. Where did you find the flush mount ones mounted near the step and what was the size? Did you have to change the hole size?
Thanks,
Dave
I am changing out all my lights to LED. Where did you find the flush mount ones mounted near the step and what was the size? Did you have to change the hole size?
Thanks,
Dave
