My '95 2530
- Thread starter warthog5
- Start date
Help Support Classic Parker Boat Forum:
warthog5
Well-known member
28in Sow Red Snapper.
warthog5
Well-known member
More Red Snappers
I have been following this thread and your boat looks great. As someone else mentioned, I am amazed at your ability, energy and how much you were able to accomplish since Sept/October.
I had a question I am hoping you can help with - on page 3, you hung your type 4 PFD on the rear of the pilot house - do you recall if you through bolted the bracket or used screws and what size did you use? I am hesitant to screw any holes but in this case if I want to keep the PFD out of the way but 'handy' - this looks to be the best spot and it looks pretty good.
Thanks for your help, larry
I had a question I am hoping you can help with - on page 3, you hung your type 4 PFD on the rear of the pilot house - do you recall if you through bolted the bracket or used screws and what size did you use? I am hesitant to screw any holes but in this case if I want to keep the PFD out of the way but 'handy' - this looks to be the best spot and it looks pretty good.
Thanks for your help, larry
I have been following this thread and your boat looks great. As someone else mentioned, I am amazed at your ability, energy and how much you were able to accomplish since Sept/October.
I had a question I am hoping you can help with - on page 3, you hung your type 4 PFD on the rear of the pilot house - do you recall if you through bolted the bracket or used screws and what size did you use? I am hesitant to screw any holes but in this case if I want to keep the PFD out of the way but 'handy' - this looks to be the best spot and it looks pretty good.
Thanks for your help, larry
I had a question I am hoping you can help with - on page 3, you hung your type 4 PFD on the rear of the pilot house - do you recall if you through bolted the bracket or used screws and what size did you use? I am hesitant to screw any holes but in this case if I want to keep the PFD out of the way but 'handy' - this looks to be the best spot and it looks pretty good.
Thanks for your help, larry
warthog5
Well-known member
It is thru bolted....3 - 10/24 machine screws and nylon lock nuts.
Be careful here. Don't measure from the side of the pilothouse. Use a framing square and establish a centerline off the deck.
The sides of the pilothouse are not straight up and down.
Be careful here. Don't measure from the side of the pilothouse. Use a framing square and establish a centerline off the deck.
The sides of the pilothouse are not straight up and down.
warthog5
Well-known member
Life is good with a Parker Boat Load of girls eating ice cream. 
Bryan 2530
Well-known member
Awesome!!! 8) 8) 8)
Brent
Well-known member
- Joined
- Mar 19, 2008
- Messages
- 6,091
- Reaction score
- 169
outstanding family time pic!
Brent
Well-known member
- Joined
- Mar 19, 2008
- Messages
- 6,091
- Reaction score
- 169
warthog5":2ee26y5r said:Folks wanted to see more pix's of the motor.
1st pix if you look close, you can see the Red line. That is where it runs in the water. It's to hight.
Mounted in the 3rd hole. Suzuki wants 6 bolts holding the motor on. They even supply special washer plates.
New UFlex Sterring Ram. I'm tired of Teleflex leaking. This is a HD unit.
The motor is covered in plastic covers.
Did you install hose reliefs on the transom?
warthog5
Well-known member
No.....It is still the stock hyd hoses.
Wart,
I joined about a month ago and have to say what an awesome story to read....and great workmanship she is truly a gem by all means....Best of luck and tigh lines! I am new to Parker Boats but always admired them and finally said life is to short not to enjoy the things we enjoy and thus far I love my 2120 but can see as the years come I will move up to a 2520...just have to pay this one off first....lol
I joined about a month ago and have to say what an awesome story to read....and great workmanship she is truly a gem by all means....Best of luck and tigh lines! I am new to Parker Boats but always admired them and finally said life is to short not to enjoy the things we enjoy and thus far I love my 2120 but can see as the years come I will move up to a 2520...just have to pay this one off first....lol
warthog5
Well-known member
Thank You....I try to compile things in detail so they can be understood, With many pix's to help explain..
warthog5
Well-known member
The Newest Project Starts.
I've been accumulating parts for a while. Still have a few more to go.
The new 2nd Station Crows nest.
It's in the process of being built. It will be loaded with stuff...... So much so that I finally found a place that sold 2 1/2in Rigging hose by the Foot.
This is a lay down unit. It will not flip toward the front, like some do.
Sorry about the Crappy Cell phone pix.....I didn't have my camera with me.
I've been accumulating parts for a while. Still have a few more to go.
The new 2nd Station Crows nest.
It's in the process of being built. It will be loaded with stuff...... So much so that I finally found a place that sold 2 1/2in Rigging hose by the Foot.
This is a lay down unit. It will not flip toward the front, like some do.
Sorry about the Crappy Cell phone pix.....I didn't have my camera with me.
Oyster
Member
I laughed when I read this post. :lol: :lol: I see you are not really done sir.warthog5":3dwk28tu said:
I may have missed it, but have you blooded the decks lately?
warthog5
Well-known member
Hey Mike You know their never done....We just run out of money or the weather gets so good you have to use it.
Scamp- Red grouper
Forgot to take pix's before a lot of fish were already cut.
Scamp- Red grouper
Forgot to take pix's before a lot of fish were already cut.
Oyster
Member
Thanks, its nice to see you are getting out and catching some fish.
warthog5
Well-known member
A few trips.....But remember, we had a Butt Load of rain last year...The boat was stocked for use and every time we turned around it was raining.
