New 2320 SC Parker Owners - w/Some Questions For Experienced Owners

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I'm debating the location for the on-board charger install.

One possible location would be in the bilge, wall-mounted on either port of STRDB bulkhead?
Thoughts?
1617336042524.png

I can not figure out what's behind those bulkheads?
Fuel tank is in front, in the center:
1617336188192.png

This is the port side:
1617336236881.png

And STRBD:
1617336258383.png

There is also space in the stern, underneath the fish/ice/kill box, accessible through the hatch behind the rear bench seat:
1617336348267.png

--
 
Just bought one of these babies......
im looking at installing it as far forward as I can of the fuel water separator in your pics81EFLjwQejL._AC_SL1500_.jpg
 
That's what I'm thinking, too.
This is my hull, a mid-production pic from the factory, looks like the space behind that bulkhead is just filled with foam:
1617502879543.png

I got my charger today, the new Promariner, I've always had good luck with those.
1617503688988.png

The plan is to mount it on that bilge bulkhead using 2" 3M VHB tape, backed up with short SS screws bedded in 5200.

--
 
Back
Top