Parts For Sale Yamaha Reliance SS Prop 15x14 1/2

[jdisco]

I have a near new (less than 100hrs) Yamaha Reliance SS Prop 15x14 1/2 for sale. I pulled it from my 21SE 150hp before I sold. It was recommended by a Parker factory tech over the stock 17x14 1/4 to improve hole shot, mid-range and higher (5,500+) rpm at WOT. $500. Willing to ship from NJ

 

[Jay B.]

I have a few questions about the change in performance when you switched props. How much difference did it make in getting up on plane? I have the 14 1/4 x 17 and sounds like the engine runs rough until 2200 rpm then smooths out. Engine is fine. What was your WOT rpm before and after the change.
Does the hub come with the prop you are selling?

 

[jdisco]

This is Yamaha part #68F-45970-20-00. It includes the Yamaha SDS Hub.

 

[jdisco]

WOT before was approx 5300 before change. After it was around 5600-5700. I feel the 17 is too much pitch for the 150 on the 21SE with its weight. Motor seemed to run better with the 15 especially getting up on plane quicker and cruise.

 

[Jay B.]

WOT before was approx 5300 before change. After it was around 5600-5700. I feel the 17 is too much pitch for the 150 on the 21SE with its weight. Motor seemed to run better with the 15 especially getting up on plane quicker and cruise.

 

[Jay B.]

Will you take $400. I will be in the Atlantic City area on 6/10 or 6/11. Where are you located. I could pick up and pay cash if it’s in good condition.

 

[jdisco]

PM me.

 

[jdisco]

Sold