Search results

My 2019 also has them on the sides of the cabin. Next to the helm and navigator's chairs. Try giving Parker a call.

My original sender was 13" long from the factory. My tank is 16 1/2" deep. I replaced it with a 16" sender. Now when the last bar starts to flash it is going to quite very soon. You can use heat shrink crimps to attach the sender.

I went with the Powertech 4 blade props Ken recommended on my 2520XLD with twin 200s. I lost 2-3MPH on the top end; but, every other operation area improved.

They have horizontal also. Give them a call https://newwiremarine.com/product/custom-actuator/

New Wire Marine

The 200s are either V6 (older) or inline 4 (newer). I have the inline 4s.

Two Ocean Tamers live on my boat

Are you talking 150 2 strokes? The four stroke 150, 175 and 200 all weight in at about 480lbs. My 2520XLD lovers her twin 200's.

Similar pose for my girl.

The beauty of PowerTech props is there are easy to "re-Hub." You can get the hub sticks and do it yourself. I carry spares on my boat just in case.

Welcome!

https://www.facebook.com/KMSMarineDecking

I do the same process outlined in this article. https://www.sailnet.com/threads/tips-for-compound-polish-wax.52772/

Brian Kersey for Coaming pads. He made these for me. Войдите на Facebook

Like Brent said.

I'm running a 2520XLD with twin 200s. Very happy.

Mine are in the second highest position with four blade props Ken recommended. 5800 WOT

I even used one for a center rigger. Lee's clamp on I believe they are 1.5." The center rigger was different size because of the bend.

PSA: I did this modification on a 2019 2520 XLD which has the wire run built in to the the overhead. Not all year Parkers have the wire run so your application may be different. The stock wiper system is a very basic circuit with a C/B an On Off switch and the wiper motor as can be seen in...

Took about two hours. The hardest part was accessing the terminals on the wiper motors themselves. I had to loosen the wiper mounts to get enough room. For the wiring I came up with a little work around that made it so much easier. If your interested in the work around let me know.