Any feedback for proposed mounting location for this 50 gallon Defiance bait tank on my Parker 2520XL. I want to be able to add a half tote or room for kill bags, cooler, spot prawn pots, etc...
2nd question: my hull is 2005. Seems to be another stringer mid deck on the transom side of the tank along with foam. It requires at least a 30" drill bit extension to allow for my hole saw blade to access. Does anyone know if this a metal stringer or if its bonded wood and or glass? When I tap on it, it sounds like metal. For reference. I included the photo of the center rigging tube with the fuel lines and the 1" intake hose and wiring I could get for the LED bait tank light. The drain tubing is 1.5" and I cut a 2" hole to route the drain tubing, but ran into the wall issue.
2nd question: my hull is 2005. Seems to be another stringer mid deck on the transom side of the tank along with foam. It requires at least a 30" drill bit extension to allow for my hole saw blade to access. Does anyone know if this a metal stringer or if its bonded wood and or glass? When I tap on it, it sounds like metal. For reference. I included the photo of the center rigging tube with the fuel lines and the 1" intake hose and wiring I could get for the LED bait tank light. The drain tubing is 1.5" and I cut a 2" hole to route the drain tubing, but ran into the wall issue.
